Scale By Chris Water Jug
The Scale By Chris Water Jug is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This water jug features a printed handle and lid and will look great in the back of a truggy, a truck body with a full depth bed, or secured to the bumper. The water jug measures 25mm deep, 10mm wide and 35mm tall and can be secured using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold the can in place.
Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
This product was added to our catalog on October 18, 2016.