RPM Axial SCX10 Rock Slider Set

This is an optional RPM SCX10 Rock Slider Set. RPM Rock Sliders are the only alternative for super lightweight performance sliders, at prices that are lower than the stock parts. Better yet...they’re Made in the USA! These sliders are compatible with SCX10 trucks with 12” (305mm) wheelbase or longer. They start with frame-rail mounts that use the stock screw mount position at the 4-link upper bolts and the inner screw holes for the frame brace. This doubles the support for the mounts and helps to eliminate the flex that plagues the stock sliders. These frame-rail mounts are L-shaped in design and feature added support ribs to better stabilize the base support structure.

RPM Rock Sliders were designed to look like full-sized 2” diameter tubes, but have been molded from RPM's blend of engineering grade nylons for strength and durability. They also feature built-in kick out at the rear wheel, to help guide your rig through turns that are too tight to maneuver without catching the rear tires or the bed section of the body. They have also been angled upward at 20° to eliminate ground clearance issues. One of the more unique features is these sliders allow both vertical and lateral adjustments! If you have the body raised too high for standard sliders, the RPM mounting system allows roughly 1/4” (6mm) of upward adjustment and more room to slide them closer to the frame than stock sliders, making them perfect for narrow-bodied applications.

NOTE: RPM Rock Sliders are designed for all versions of the Axial SCX10 with a minimum wheelbase of 12” (305mm). Shorter versions may encounter interference issues with the rear tires. RPM Rock Sliders replace stock Axial part AXI80041 and are tested and guaranteed to fit Axial AXI30502 frame rails only.

This product was added to our catalog on June 10, 2015