RocHobby F2G Super Corsair High-Speed Plug-N-Play Electric Airplane (1100mm)

This is the RocHobby F2G Super Corsair High Speed Plug-N-Play 1100mm Electric Airplane. The RocHobby 1100mm Super Corsair Racer is built from the ground up for performance. The combination of a powerful 3648-KV770 motor and heavy-duty 70A ESC allow this Sport Racer to reach speeds in excess of 85 MPH with a 4 blade prop. Clean lines, exceptional detail and simple assembly make this model a top choice among intermediate and advance sport flyers. Similar to other RocHobby models the Corsair Racer comes with a multitude of high-quality, scale features including split-flaps, electronic retractable landing gear, detailed cockpit, and authentic graphics. Own a part of Reno Racing history with this high performance scale radio control model.

F2G Super Corsair Racing History
The Goodyear F2G "Super" Corsair was developed by the Goodyear Aircraft Company, using the FG-1/F4U-1 Corsair design as a base, to create a special low-altitude fighter. The plane, registered as NX5588N, went from owner to owner and slowly deteriorated. In 1995, Bob Odegaard found this airplane and quickly made arrangements to purchase it and brought it up to his shop, Odegaard Aviation in Kindred, ND. There they restored it back to airworthy condition, and flew it again in 1999, 50 years since it was last flown. Race 57 LLC is the owner and operator of this rare and beautifully restored Goodyear F2G-1D "Super" Corsair (BuNo 88458). The aircraft was a winner at the 1999 Rolls-Royce Aviation Heritage International and is a regular competitor in the unlimited class at the Reno National Championship Air Races. This airplane was also featured in the movie "Thunder Over Reno".

Features:

• Modular motor board allows use of both standard and high speed motor configurations
• Powerful Brushless 3648-KV770 motor combined with heavy-duty 70A ESC.
• Can be tuned to reach speeds in excess of 100 mph (160 km/hr)
• Super scale appearance including hand painted pilot, detailed cockpit, authentic graphics, four bladed prop, wing stabilizers, and air scoop
• Simple construction with minimal glue required for assembly
• Rugged electronic retractable landing gear with metal trunnions
• Durable EPO foam with reinforced one-piece wing
• 9g digital metal gear servo makes the movement exactly perfect
• strong high brightness LED light to make night fly better

Specifications:
Wingspan: 1100 mm/43.3 in
Overall Length: 900 mm/35.4 in
Flying Weight: Around 1400g 
Motor Size: Brushless 3648-KV770
ESC: 70A with 5A SBEC
Servo: 9g digital metal gear Servo x4, 9g slow servo x2
CG (center of gravity): 58--65mm (From Leading Edge)
Prop Size: 10.5x8 4-blade
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Retracts: Yes
Approx. Flying Duration: 5 minutes
Minimum Age Recommendation: 14+
Experience Level: Intermediate/Advanced
Recommended Environment: Outdoor
Assembly Time: 45 minutes
Is Assembly Required: Yes
Material: Durable EPO
Build Level: Plug N Play

Needed to Complete:

• 6-chanel Radio System
• LiPo Battery (14.8V 2200--2600mAh 25C recommended)
• LiPo Battery Charger

Click Here To Download User Manual

This product was added to our catalog on February 12, 2015