REDS 32mm Off-Road "Tetra" Adjustable 4-Shoe Clutch System
REDMUQU0021
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The REDS Racing 32mm Off-Road "Tetra" Adjustable 4-Shoe Clutch System is designed to make the engine power output more linear and smoother, so you can get the most out of your engine.
The 4-shoe clutch is easy to adjust and thanks to a rotating front plate there’s no need to disassemble it or to change springs. When you do, you don't need any tool, just your hands. You can change the spring preload from L to H position or vice versa with three simple steps: pull out the front plate, rotate it counter-clockwise until you center the desired hole with the pin and push it in to the stop position.
The clutch system is 100% made in Italy and comes pre assembled and tested to ensure the best performance and reliability. It is available both with 32mm and 34mm diameter to make it suitable for any type of car (Buggy and Truggy). 32mm for Kyosho, JQ, Mugen, Team Associated, Hot Bodies, Serpent, Xray. 34mm for Team Losi, Agama. The original REDS bell can be used with all the cars listed above, except for Team Losi.
Hybrid Shoes
The clutch system is made up of a hybrid 4 shoes system: two 7075 aluminum shoes and two carbon shoes which is suitable for every kind of track.
Flywheel
The lightweight flywheel has a low inertia to rotation to maximize engine power. Thanks to the 32mm flywheel design, it is possible to race on every kind of ground without danger of flaming out
Vented Bell
The REDS high performance vented clutch bell is manufactured with a special hardened carbon steel and high accuracy CNC machining. These features assure longer life to clutch bells, shoes and ball bearings.
Clutch Setup Recommendations:
The 4-shoe clutch is easy to adjust and thanks to a rotating front plate there’s no need to disassemble it or to change springs. When you do, you don't need any tool, just your hands. You can change the spring preload from L to H position or vice versa with three simple steps: pull out the front plate, rotate it counter-clockwise until you center the desired hole with the pin and push it in to the stop position.
The clutch system is 100% made in Italy and comes pre assembled and tested to ensure the best performance and reliability. It is available both with 32mm and 34mm diameter to make it suitable for any type of car (Buggy and Truggy). 32mm for Kyosho, JQ, Mugen, Team Associated, Hot Bodies, Serpent, Xray. 34mm for Team Losi, Agama. The original REDS bell can be used with all the cars listed above, except for Team Losi.
Hybrid Shoes
The clutch system is made up of a hybrid 4 shoes system: two 7075 aluminum shoes and two carbon shoes which is suitable for every kind of track.
Flywheel
The lightweight flywheel has a low inertia to rotation to maximize engine power. Thanks to the 32mm flywheel design, it is possible to race on every kind of ground without danger of flaming out
Vented Bell
The REDS high performance vented clutch bell is manufactured with a special hardened carbon steel and high accuracy CNC machining. These features assure longer life to clutch bells, shoes and ball bearings.
Clutch Setup Recommendations:
- 4x Carbon, L Setting, Buggy: Used on very loose tracks where little punch is needed
- 2x Carbon 2x Alum, L Setting, Buggy: Good all around setup. Best compromise for punch and mileage
- 1x Carbon 3x Alum, L Setting, Buggy: Increased punch with slightly less mileage
- 2x Carbon 2x Alum, H Setting, Buggy: Increased punch, good for jumps right out of turn, with average mileage.
- 1x Carbon 3x Alum, H Setting, Buggy: Very aggressive with great punch
- 2x Carbon 2x Alum, XH* Setting, Truggy: Good all around setup. Best compromise for punch and mileage
- 2x Carbon 2x Alum, XXH* Setting, Truggy: Very aggressive with great punch
*NOTE: XH (REDMUQU0033) and XXH (REDMUQU0034) front plates sold separately.
This product was added to our catalog on March 20, 2017
- HB Racing D815
- HB Racing D817
- HB Racing D817 V2
- HB Racing D817T
- HB Racing D8T Original
- HB Racing D8T Tessmann Edition
- JQ THE Car (White Edition LV)
- JQ THE Car (White)
- JQ THE Car (Yellow)
- Kyosho MP10
- Kyosho MP9
- Kyosho MP9 TKI2
- Kyosho MP9 TKI3
- Kyosho MP9 TKI4
- Mugen MBX7 Original
- Mugen MBX7R
- Mugen MBX7T Original
- Mugen MBX7TE
- Mugen MBX7TR
- Mugen MBX8 Original
- Mugen MBX8T Original
- Serpent S811 Cobra 2.0
- Serpent S811 Cobra 2.1
- Serpent S811 Cobra 2.2
- Serpent S811 Cobra T
- Team Associated RC8B Original
- Team Associated RC8B3
- Team Associated RC8B3.1
- Team Associated RC8T Original
- Team Associated RC8T3
- XRAY XB8 2015
- XRAY XB8 2016
e
Verified Owner
Wednesday, Aug 21 2019 (about 4 years ago)
REDS 32mm Off-Road "Tetra" Adjustable 4-Shoe Clutch System
So I fell for the marketing and ended up having to buy the 4 aluminum shoes to make this clutch work, so $90 in hindsight I should have stuck with the kits clutch. Luckily they now offer the v2.1 which I would advise everyone to get instead of this clutch. The carbon shoes not only wear fast (maybe 2 gallons of use) they bind up and engage late as I realized this once I took the clutch apart to replace the all aluminum shoes. Might have to drill out the pin hole for the carbon shoes to allow them to move freely.
Irvin Avinger
Monday, Apr 29 2019 (about 4 years ago)
REDS 32mm Off-Road "Tetra" Adjustable 4-Shoe Clutch System
This cluch does everything described fast shipping best cluch iv had so far