RC4WD TRX-4 King Off-Road Racing Shocks (90mm)
RC4WD TRX-4 King Off-Road Racing Shocks. These optional shocks are officially Licensed from King Off-Road Shocks and were design from the ground up to be durable and ready to handle the rocks.
Features:
Features:
- Machined Billet Aluminum
- King Laser etched on top cap and retainer ring
- Dual Spring Design
- X-ring Gaskets
- Titanium Nitride Coated Shock Shafts
Specifications:
Hole to Hole (Compressed): 2.67in / 68mm
Hole to Hole (Uncompressed): 3.54in /90mm
Overall Length: 3.92in / 99.7mm
Travel Length: 0.86in / 22.0mm
Shock Body OD: 0.57in / 14.7mm
Shaft OD: 0.15in / 3.9mm
Each Weight: 0.67oz / 19.2g
Includes:
Includes:
- (2) RC4WD King Off-Road Racing Shocks for Traxxas TRX-4
- (1) King Decal Sheet
This product was added to our catalog on May 24, 2021
Christopher Harding
Verified Owner
Wednesday, Sep 22 2021 (about 2 years ago)
RC4WD TRX-4 King Off-Road Racing Shocks (90mm)
If I could rate this product any lower, I would.. They look the part but the oil retention i.e. seals are recycled rubberbands. Do not waste your time and money on these Lego shocks.
Chris Kimmelshue
Thursday, Jul 8 2021 (about 2 years ago)
RC4WD TRX-4 King Off-Road Racing Shocks (90mm)
TL;dr: Proper scale looks and function, but re-build them with o-ring grease before use.
I installed these on my TRX-4 Bronco out of the box with 40wt oil. Immediately on the first trial, they leaked profusely.
I normally re-build these shocks at first, specifically RC4WD's offerings, so you will need to do the same before filling them with oil and running them.
Build quality is good, with typical RC4WD fit and finish. The aesthetics are spot-on for scale looks. The spring rate appears to jibe with the weight of the 324mm TRX chassis with typical accessories installed and a spare tire.
I installed these on my TRX-4 Bronco out of the box with 40wt oil. Immediately on the first trial, they leaked profusely.
I normally re-build these shocks at first, specifically RC4WD's offerings, so you will need to do the same before filling them with oil and running them.
Build quality is good, with typical RC4WD fit and finish. The aesthetics are spot-on for scale looks. The spring rate appears to jibe with the weight of the 324mm TRX chassis with typical accessories installed and a spare tire.