RC4WD High Performance SMD LED Light Bar (75mm/3")
The RC4WD 1/10 High Performance SMD LED Light Bar will give any project a killer look, and light up the trail when the sun goes down. Plus, its fully compatible with a standard 2S LiPo, or 11.1V/3S LiPo when used with a BEC.
- Cast Molded Housing
- Reversible "L" brackets to fit many applications
- Adjustable "L" brackets for rotating light
- 16 Individual SMD LED bulbs
- Super Bright Lighting
- Vented on side to dissipate heat
- Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
- Standard Receiver Plug
- Connects to extra channel on receiver
- 2mm Mounting Holes
Rated Output: 32 Lumens
Overall Length: 3.77in / 95mm
Light Bar Width: 3.1in / 78.8mm
Overall Height: 0.81in / 20.8mm
Light Bar Height: 0.63in/16.2mm
Weight: 1.09oz / 31g
- (1) RC4WD High Performance SMD High Performance LED Light Bar (75mm/3")
- (2) Light Mounts
- Use medium grade thread lock on "L" bracket nut to prevent loss and to keep the light in position.
- Uses 2mm mounting hardware.
- Unit needs to be directly connected to 7.4 volt battery. Can also be connected to 11.1volts with use of BEC.
- The light bar comes with a standard receiver plug, this is only for ease of use. The receiver will not provide enough power for the light bar causing it to be dim. If you want the light to be brighter, you will need to power it directly from your battery or use a BEC to get more power to your receiver.
This product was added to our catalog on November 2, 2017.