RC4WD Gelande II LWB 1/10 Scale Truck Chassis Kit (No Body)

The RC4WD Gelande II LWB 1/10 Scale Truck Chassis Kit is packed full of capability and is ready for the most challenging conditions. Put your off-road driving to the test and see why the G2 can easily maneuver extreme descents and climb with ease.

The G2 is built with quality materials and craftsmanship like the R3 single speed transmission providing power down to the transfer case and out to the Yota II Axles. The G2 comes with a 4 link rear and 3 link panhard bar suspension as a standard feature. The chassis mounted servo is out of view for a more scale appearance.

The G2 is completely versatile and can pull off many looks and styles. With the countless options available, RC4WD let's you customize your G2 exactly how you want without sacrificing performance. From emergency and expedition vehicles to daily drivers and hard core rock climbing rigs, the core of the G2 is built for the true off-road enthusiast!

NOTE: Body not included. Photos show chassis with body installed for illustrative purposes only. Stock configuration requires a 331mm wheelbase compatible body.

Features:

• Custom Designed for True To Scale Looks
• Realistic Aluminum Ladder Frame Chassis
• R3 Single Speed Transmission
• Center Mounted Realistic 4x4 Transfer Case
• Cast Metal Axles with Locked Differentials
• 3 Link Front and 4 Link Rear Suspension
• 1.9" Stamped Steel Beadlocks w/Lug Nuts
• Super Grip Dirt Grabber Tires
• Chassis Mounted Steering Servo
• Dual Spring 80mm Scale Black Shocks

Specifications:
Wheelbase: 331mm (13")
Length: 582mm (22.91")
Width: 220mm (8.7")
Height: 140mm (5.5")
Ground Clearance: 50mm (1.97")
Weight: 1.92Kg / 4.32Lbs 

Needed to Complete:

• Motor (35t, 45t, or 55t)
• Electronic Speed Controller "ESC"
  
• Radio and Receiver (2 channel or more)
  
• Standard Size Servo
  
• Battery (Consult your "ESC" manual)
  
• Charger (Consult your battery guide)
  
• Tools for assembly
• Threadlock
  
• Body

NOTE:

• While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
• Use good quality hex drivers to avoid stripping screw heads.
• Use thread lock when putting metal screws into metal parts.
• Steps marked with an asterisk (*) require thread lock.
• Use thread lock sparingly.
• Do not over tighten screws otherwise you may strip the thread.
• Spare Wheel and Tire not included
• Fits RC4WD ARB Front Winch Bar Bumper for Gelande II D90/D110 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168).

This product was added to our catalog on July 13, 2018