RaceTek LaForge 5.8GHz Main Receiver Module (V1-3)

LaForge FPV 5.8GHz Receiver Module for Fat Shark Goggles provides incredible signal sensitivity for the best RF performance even in the most challenging of conditions. Featuring an OLED display, and a plethora of features, LaForge FPV will forever change the way you FPV. 

Features:
VRX Module: Custom engingeered VRX module with dual 5.8GHz filter capable of receiving the cleanest RF signal
OLED Screen: Crystal clear 128x64 pixel OLED display can be seen in daylight and night
Buttons: Three dedicated buttons make menu navigation simple
Diversity Port: Add the *optional* Diversity Module and extend your flying range by using a direction antenna paired with an omni antenna
IR Emitter: Quickly transfer all settings to the transmitting module with the quick bind infrared protocol
Firmware: Firmware upgradeable for constant improvements

Specifications:
Dimensions: 42.1x29.5x8 (excluding header pins)
Status LEDs: Indicates power (red), status (blue), active (green)

IR Emitter:

• Requires line of sight to VTX IR decorder
• Short operation range: 10-20m
• Payload sent 2x per second

• Favorites: Quickly switch between your favorite channels, and store up to 40
• Manual Mode: Select exactly which channel you want to be on
• Band Scan Mode: Bar graph showing the entire 5.8GHz spectrum
• Spectate Mode: Scan the 5.8GHz spectrum for strong signals
• Screen Saver: Display current channel, call sign, and signal strength
• Settings Menu: La Forge settings adjustment
• Quick Save: Press and hold the select button for 2 seconds to save all current settings

This product was added to our catalog on December 31, 2018