RaceTek H150 Mini Carbon Fiber Drone Kit
The RaceTek H150 drone is a 150 class airframe that uses lightweight, high quality CNC machined carbon fiber, and aluminum materials. These materials create a sleek, high performance airframe at a cost effective price point. The dual deck design allows plenty of room for your electronics. Included with the bare frame is a camera bulkhead for your FPV camera.
Because this is a kit, no electronics are included. This provides the freedom to build the frame with gear you already have, or take advantage of the low price and pick up some high end electronics and unlock the true potential of this awesome machine.
- Motor mounting slots in the arms are for 2mm hardware. The slots can be easily modified to accept 3mm hardware
- FPV Camera mount is notched to pass wires through if needed
- Optional rubber landing gear are provided. Flexible mounting locations: can be affixed to middle frame with provided screws to thread into vertical body posts, or attached to arms after drilling 3mm hole to allow screw to pass through and be captured by provided m3 lock-nut.
Needed to Complete:
Transmitter: 6 Channel (Minimum) Computerized Aircraft System
Motors: DYS 1104, SunnySky 1306
ESC: FVT Littlebee 20A (GCS-M-043), Hobbywing XRotor 10A (HWA30901008), DYS 10A (DYSXM10A)
Prop: 3" Props
Power Distribution Board: RaceTek PDB (GCS-FC-021)
Flight Controller: Naze32 Acro
Nylon Standoffs: RC Timer Nylon Standoff
Wire: 20awg Wire, Red and Black
Connectors: JST Connectors
Velcro: Velcro Tape
Battery: Pulse 11.1V 3s LiPo 450mAh (PLU30-4503) or Pulse 11.1V 3s LiPo 860mAh (PLU35-8603)
Camera:RC Timer ELGAE FOV127 (RTRFOV127-SMA)
Video Transmitter: RC Timer ELGAE FOV127 (RTRFOV127-SMA)
FPV Goggles: Goggles
Monitor: Heli-Star 7" FPV Monitor
Antennas: Heli-Star 5.8GHz Clover Leaf Antenna (HLS-0106)
This product was added to our catalog on January 29, 2016.