The Littlebee is an Opto ESC, which will require an alternate power source to power your flight controller. A list of preferred Power Distribution Boards can be found below:
- RaceTek Matek 5 in 1 (GCS-FC-066)
- RaceTek (GCS-FC-021)
- RaceTek (GCS-FC-022)
Additionally it is recommended to install a voltage step-down or filter for your video equipment such as your video transmitter and FPV camera. AMain recommends a LC Filter to help prevent voltage spikes damaging the video equipment.
NOTE: The PCB color can arrive in black or red depending on the batch during manufacturing. Only the color is different, no other components are affected.
Features:
- BLHeli Firmware
- OneShot 125 Support
- Damped Light Support
- Flexible Programming Connections
- Works with DYS USB Linker (DYSUSBLV2)
Specifications:
Input Voltage: 2-6 cells, 2S-4S LiPo
Constant Current: 30 Amps
Burst Current: 40 Amps
Weight: 12g w/ wires, 4.5g bare board (wires removed)
Dimensions: 25x12.5x3mm (board dimensions only)
Motor Wire: 60mm length, 18awg
Battery Wire: 90mm length, 18awg
BEC: None
This product was added to our catalog on May 11, 2016