ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Related Colors and Styles
PTK-2111
Back Order Now
$2.99 flat rate shipping!
Learn More
This item earns up to 17 VIP Reward Points
Learn More
The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash.
The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).
NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference.
Features:
- 30mm aluminum cooling fan
- Ideal for ESC and motor applications
- Aluminum casing helps protect the fan blades
- Compatible with 2S HV LiPo systems (8.75V max)
- Anodized black with silver chamferred edges
- Perfect for 1/12, 1/10 and 1/8 scale platforms
- 2 pin JST connector and included extension for easy installation
| Product Model | High Speed HV Cooling Fan |
| Application | 1/12 - 1/8 Motor & ESC
|
| Fan Speed | 28,000 RPM |
| Dimensions (LxWxH) | 31x31x10.5mm |
| Mounting Pattern
|
24x24mm |
| Material
|
Aluminum Case w/Plastic Fan
|
| Weight
|
12.5g
|
| Operation Voltage
|
5V - 8.75V
|
| Connector | 2 Pin JST |
| Current | 0.45A
|
ProTek R/C is an AMain Sports & Hobbies brand.
This product was added to our catalog on September 13, 2019
Richard Davis
Verified Owner
Wednesday, Jul 22 2020 (about 3 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
These fans are good. They push a lot of air and the aluminum housing is nice and sturdy and does not flex. I replaced the ESC and Motor fans on my Taxxas Maxx with these because the original ones were bad quality and fan blades would break off with flexing during rough bashing. Only thing is I had to flip the + and - on the connector around for whatever reason.
Dwaine Porter
Verified Owner
Friday, Dec 27 2019 (about 4 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
This thing really blows out some air especially on a 7.4 bec setup. I have 2 of these and they are the best fans on the market to date.
LB
Verified Owner
Saturday, May 23 2020 (about 3 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
A little noisy but this fan really moves a bunch of air to help keep my motor temps a little lower.
C Wilson
Verified Owner
Sunday, Feb 14 2021 (about 3 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Excellent construction, perform great. I run them on all my 1/10th scales.
Steve Extance
Verified Owner
Saturday, Jan 23 2021 (about 3 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
These provide the same airflow as the equally expensive plastic bodied fans but hold up better. A little heavier maybe but well worth it. In all my vehicles.
Robert Katnich
Verified Owner
Monday, Jun 1 2020 (about 3 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
This fan rocks. It's kind of on the loud side but wow, it pushes some serious air. My Trinity 17.5 is incredibly cooler after a 8-10 minute run.
Scott Murphy
Verified Owner
Saturday, Jul 31 2021 (about 2 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
I bought 3 of these, for 2 of my TLR 22 5.0 buggy, one TLR Short Course Truck and they work as intended, i didnt realize after getting back into the hobby after 20yrs all that has changed, i have gone from RTR TLRs to kit builds... Great product, works as intended...
Update: 07/01/2022, i wanted to update anyone that was wondering about this fan, it works really really well i have no real overheating, well i have no overheating that i noticed... I am using them in my TLR 22 5.0 losi Buggy.
Update: 07/01/2022, i wanted to update anyone that was wondering about this fan, it works really really well i have no real overheating, well i have no overheating that i noticed... I am using them in my TLR 22 5.0 losi Buggy.
Kai
Verified Owner
Thursday, Mar 25 2021 (about 3 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Got this because the blades on my stock Hobbywing fans tore off. Used this to replace it, fits great on the XR8. Does a great job of keeping my electronics cool, much better than the stock one even when it had blades on it! My only complaint was that the wire is kind of long but that's probably not an issue for most people.
Kevin Inghram
Verified Owner
Friday, Nov 10 2023 (5 months ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
This fan looks great and pushes a lot of air. Unfortunately, it died on me after about a month and I only used it in a handful of carpet races. I even made sure to get any carpet fibers out of the fan blades after every heat. Will try something else.
*Update - AMain reached out and are sending me a replacement under warranty. Hopefully this one lasts longer. Will update review after some track time.
*Update - AMain reached out and are sending me a replacement under warranty. Hopefully this one lasts longer. Will update review after some track time.
Evan Gunthner
Verified Owner
Wednesday, Jul 12 2023 (9 months ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
I've bought 3 of these over the last 2 years or so, and I love them. The black on chrome look is great, and it's very solid and light. The fan itself blows ALOT of wind for it's size (I used to build custom PC's for a living... so, I know a good bit about tiny fans..), which I was very happy with. It isn't perfect.... it is loud for its size... but, I don't see why anybody should care about this. If it was loud enough to set off car alarms, or I had to scream to talk over, maybe i'd take an issue with it... but, I actually LIKE the fact that it's loud, because it makes it REALLY easy to tell if the fan stops spinning after a crash. I WILL buy again. Do I unplug this badboy when I connect my ESC to bluetooth? Yes. It's annoying to listen to if my car is just sitting there. Is my car running cooler and have all 3 of my fans stayed working after some serious impacts AND still manage to look good? Also yes. I'll take that trade-off all day long!
Morgan Hall
Verified Owner
Wednesday, Jul 27 2022 (about a year ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Fan really drops temps on my motors. Its a little loud, but I think that's because its spins at higher RPM's than some other fans. The extra length cable is really appreciated. I've always been able to reach my receiver for power.
Pete DeVries
Saturday, Apr 4 2020 (about 4 years ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
I added this to my TLR 2 5.0 Elite and the black and silver aluminum housing perfectly matches allnof the stock aluminum on the car, plus the Protek 160T servo case and the Hobbywing XR10 Pro G2 ESC / motor combo. Everything looks like it was designed to go together, and the fan just topped it all off. Plus it works great and moves a ton of air. I installed the blue version on my Tekno EB410.2 and its awesome too...
Brandon Nebel
Tuesday, Mar 12 2024 (5 weeks ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Very powerful fan. It keeps the whole car cool. I highly recommend them at this price point.
Randy Gray
Verified Owner
Friday, Jan 5 2024 (3 months ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
If u wanna be cool this fan will do the job works great
Winnie the Pooh
Verified Owner
Sunday, Aug 27 2023 (8 months ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
It works and looks great but on my first fan the wire didn't hold up on one fan I bought. And my second one didn't start upon turning on my car on one full lipo pack suddenly. Gonna have to buy another one, I guess oh well.
Gman
Verified Owner
Sunday, Apr 16 2023 (about a year ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Fan is good, but wire is flimsy and breaks easily.
Redrider
Verified Owner
Thursday, Apr 13 2023 (about a year ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
A little loud, but no more than other brand motor fans I have heard. Pushes a ton of air, and keeps the motor cool even on long practice runs. Sturdy construction, and looks great. I've run over a dozen batteries packs with it and no problems yet. I have it installed in my losi 22 5.0 AC with 17.5 motor.
Wes Miravalle
Thursday, Dec 29 2022 (about a year ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
This fan will take a beating and keep on pushing cool air over your RC electronics. I use this fan on every surface RC vehicle I own, from 1/8 scale off-road to 1/10 off-road. Best fan on the market at a reasonable price point!
Mark Fitch
Verified Owner
Thursday, Sep 22 2022 (about a year ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
I run these in 5 of my vehicles. Granted, I don't run them everyday. I hook them to the receiver only, which is 6 volts maximum. They run all the time.
And they blow some serious air compared to some $10.00 ones. I think it's important the body is aluminum. This way, close tolerance remains observed, unlike plastic housing which can warp, causing fan to interfere with housing.
And they blow some serious air compared to some $10.00 ones. I think it's important the body is aluminum. This way, close tolerance remains observed, unlike plastic housing which can warp, causing fan to interfere with housing.
kirk true
Verified Owner
Tuesday, Sep 6 2022 (about a year ago)
ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
This fan works very well but it is loud and a little large for buggys.
