ProTek RC 2S 100C Silicon Graphene HV Saddle Pack Lipo Battery (7.6V/6200mAh) w/4mm Connectors (ROAR Approved)

ProTek RC
PTK-5112-17
Low Price: $89.99
Add To Cart Add to Wish List
In Stock Online!
Super Saver Shipping!
This item is eligible for Super Saver Shipping Learn More
This item earns up to 90 VIP Reward Points Learn More

The ProTek R/C 2S 100C 6200mAh Silicon Graphene HV LCG LiPo Battery is a great battery option for any racer looking for a lightweight saddle pack battery. Weighing 272 grams, the HV Saddle Pack is lighter than a standard saddle pack, with much higher capacity. This provides more runtime, and a dramatic increase in voltage and punch over the course of a run.  

ProTek R/C Silicon Graphene 100C LiPo batteries are the next step in the evolution of LiPo battery technology. Silicone Graphene construction offers improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage!

When compared to standard LiPo and LiHV, Silicon Graphene cells deliver an array of benefits! Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle - with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 100C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C Silicon Graphene packs are perfect for racers and bashers that demand the absolute best. 

"The SG packs are worth .1 to .2 tenths of a second per lap in the 17.5 classes because they have more punch and they dont fade. They are legit! - Randy Pike, Tekin Team Manager

"The power drop off is noticeably later in the run using the Silicon Graphene LiPo batteries. The IR rating keeps getting lower and lower with every cycle and the battery temp after a run is much lower than our old 100C packs." - Chad Bradley, ProTek R/C Product Specialist

While these batteries are technically LiHV cells, they can still be charged with a standard LiPo charger. The overall voltage and capacity will be slightly less than if charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the reduced weight and low internal resistance. Some sanctioned races have maximum 8.4V battery end volt requirements, and these packs will offer a noticeable advantage when compared to a standard 7.4V LiPo pack.

Features:

  • Lighter than a standard saddle pack, with higher capacity
  • More runtime, with a dramatic increase in voltage and punch
  • Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
  • Improved efficiency, lower operating temperatures, and lower internal resistance!
  • Increased run time, increased cycle life and increased voltage!
  • More capacity gram for gram when compared to standard LiPo cells
  • Perfect for stock class racers looking to shave grams
  • 10C max charge rates - 1C charge rate recommended for longest life
  • 7.6V nominal voltage

Battery Model HV Saddle LiPo
ROAR Approved Yes
Type Silicon Graphene 
Voltage 7.6V nominal
Capacity @7.4V
5400mAh
Capacity @7.6V
6200mAh
Weight
272 g
Connector Type
4mm Bullet
Balance Connector
2mm Bullet
Number of Cells 2 Cell
Configuration 2S3P
Dimensions (WxLxH) 47x69.5x25.1mm ea
Maximum Charge Rate 10C (62A)
Continuous Discharge 100C (620A)
Watt Hour @7.6V
47.12Wh

 


LITHIUM POLYMER SAFETY INFORMATION

IMPORTANT:
1) DO NOT leave the battery in your model when charging
2) DO NOT leave unattended when charging
3) ALWAYS balance charge the battery
4) ALWAYS use a LiPo charging bag
5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
6) YOU MUST not over discharge the Li-Poly battery pack
7) READ & UNDERSTAND the instructions carefully before operating this battery

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.

Do not expose batteries to sunshine or store/charge batteries at the temperature above 35C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.


This product was added to our catalog on December 12, 2016.