ProTek RC 230S Standard Digital "Super Speed" Helicopter Tail Servo (High Voltage)
This is the ProTek R/C 230S Digital "Super Speed" Metal Gear Helicopter Tail High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 230S Tail servo delivers lightning fast 0.03 transit speed and 160 oz-in of torque at 7.4V. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum clamping style double arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.
NOTE: This servo is not recommended for use with receiver/voltage regulator combo's. We highly recommend you use the ProTek R/C Dual Power Bus Advanced Linear Voltage Regulator, or similar regulator to avoid potential brown out conditions.
- Developed for helicopter tail applications
- Aluminum middle case
- 0.03 transit speed, and 160 oz-in of torque @ 7.4V
- 1520μs / 333hz working frequency
- Aluminum clamping dual arm servo horn
- Full metal gears and dual ball bearings
- 200mm long 22awg connector wire w/gold plated connectors
- Coreless motor
|Recommended Application|| Helicopter Tail
|Operating Voltage|| 4.8V - 7.4V
|Operating Temperature||14° to 140° F (-10 to +60° C)|
|Operating Speed @ 6.0V|| 0.04/60° sec
|Operating Speed @ 7.4V
|| 0.03/60° sec
|Dynamic Torque @ 6.0V
||120 oz-in (8.6 kg-cm)
|Dynamic Torque @ 7.4V
|| 160 oz-in (11.5 kg-cm)
||High Efficiency Coreless Motor
|Output Shaft||25 Tooth
||1520μs / 333hz|
ProTek R/C is an AMain.com brand.
This product was added to our catalog on October 8, 2012.