ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo

Read Reviews
Write a Review
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
In Stock Online
Usually ships in 24 hours
$1.99 flat rate shipping! Learn More

You might also need...

Servo Horns
$11.99 - ProTek RC Aluminum Clamping Servo Horn (Black) (25T-ProTek) (addon details...)
None
Servo Grommets
$6.99 - ProTek RC Aluminum Servo Mount Grommet (Black) (4) (addon details...)
None
This item earns up to 50 VIP Reward Points Learn More

This is the ProTek R/C 100T Digital Torque Metal Gear Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what the competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 100T Digital Torque servo delivers a powerful 216 oz-in of torque with a 0.14 transit speed at 6.0V. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a cored motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency. 

Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back. 

Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.

 

Warranty Info Icon small

Features:

  • Ideal for any 1/10 scale vehicle application
  • Aluminum middle case
  • 0.14 transit speed, and 216 oz-in of torque @ 6.0V
  • Full metal gears and dual ball bearings
  • 200mm long 22awg connector wire w/gold plated connectors
  • Cored Motor
Servo Model
100T
Recommended Application 1/10 Surface
Operating Voltage 4.8V - 6.0V
Operating Temperature 14° to 140° F (-10 to +60° C)
Operating Speed @ 4.8V 0.17/60° sec
Operating Speed @ 6.0V
0.14/60° sec
Dynamic Torque @ 4.8V
173 oz-in (12.5 kg-cm)
Dynamic Torque @ 6.0V
216 oz-in (15.6 kg-cm)
Motor Type
Cored DC Motor
Output Shaft 25 Tooth
Gears Metal
Weight 54.9g
Pulse/Frequency
1520?s / 333hz

ProTek R/C is an AMain Sports & Hobbies brand

This product was added to our catalog on October 9, 2012

Verified Owner
Sunday, Feb 24 2013 (about 8 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
It has the torque but doesn't have the speed. I instaled it on an SC10B. It is a good servo for the price and if you are not planning to use it for racing.
Verified Owner
Sunday, Oct 26 2014 (about 7 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
bought this with the plans of installing in my 8.2e when its aging savox finally went. as is the case with r/c the servo in my 10-scte went first. so I put the 100t in that truck. simply put, this servo is amazing! it has the power and speed to put my truck wherever I want even under loads of landing big jumps into corners on outdoor tracks. indoors it just laughs at whatever I can throw at it. putting one in my proline pro2sc next. may be a little overkill on a lighter car like that but better to have more and not need it than not enough. haven't experienced any glitching but I use it with an rx8g2 those seem to rarely glitch. I would highly recommend this product!
Verified Owner
Thursday, Mar 20 2014 (about 7 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
great servo! nice quality finish, reasonably fast. a great upgrade over any stock servo in a crawler
Verified Owner
Thursday, Nov 28 2013 (about 8 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
This is a great servo! Plenty of torque and speed for a 1/8 buggy to run on virtually any environment. One of the best deals that you will find on the market. Mine has five plus gallons on it, and have not had a single issue.
Verified Owner
Monday, Jun 10 2013 (about 8 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Purchase this for a Gmade R1 Crawler and this servo has plenty of TQ to turn the big 2.2 wheels on any surface. This is a great servo for the price. The only down side it does not come with a servo horn but all in all I am very happy with the purchase and I would recommend it.
Verified Owner
Saturday, Jun 20 2020 (about a year ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
I used this in a Slash 2wd 4 25 lap heats and it froze upped. A real disappointment for beginner.
Verified Owner
Tuesday, Jun 17 2014 (about 7 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
love this thing, turns alot faster then 17 id say,, great little servo
Verified Owner
Thursday, May 15 2014 (about 7 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
This has been a great servo for my Associated B4.2. It has plenty of torque and good speed, and is definitely a good upgrade from any stock servo, especially for the price. Planning to run this in my SC10 and RC8 for steering. I run the 100SS for throttle in my RC8 and that has been great, too.
Verified Owner
Sunday, May 11 2014 (about 7 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
I bought this with recommendation from a friend who runs these servos in all his vehicles (either high torque or high speed versions). Replaced the Traxxas 2075 servo with this on my Slash Platinum 4x4 with newer LCG chassis conversion. This servo has been trouble free and the anodized finish makes it look pricey. No glitches or weird noises - just clean operation. I use a Losi servo horn (futaba toothed) to tie things together. Other than my Futaba R2004GF receiver, the truck is stock. Oh, and a roll cage from VG Racing which brings the running weight to 6.5 lbs.
Wednesday, Aug 2 2017 (about 4 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Great servo for the guy on a budget and getting into racing and bashing. They get the job done. Not the fastest or most powerful but they aren't noisy and are reliable.
Verified Owner
Thursday, Jun 1 2017 (about 4 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Running on my scx10.2 with small 1.9 and tall 1.55 tires. It get the job done. No issue yet. I would buy it again for tiny tired trucks.
Verified Owner
Wednesday, Jul 1 2015 (about 6 years ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
very good servo , use on my losi 2.0 nitro , was going to use is for throttle / brake , but with my current budget had to use it for steering servo temporarily , I will keep it for steering because it really seams to work well , i think with nitro where you have some lag time with an engine it really works , cant say weather or not it would work well with brushless truggy / buggy . I use all HV 350 + oz/in - less than .10 @ 60 degrees for brushless . I will try it next time i blow a servo on brushless and let you know , CHEERS!
Verified Owner
Tuesday, Nov 9 2021 (3 weeks ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Used in my VS4-10 Phoenix for the shifting servos, they work well and fast. Did not read the description and didn't notice they were not waterproof but that's my fault.
Verified Owner
Wednesday, Oct 27 2021 (5 weeks ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
I installed these servos in 2 of my 1/10 scale monster trucks and love how well they work over stock RTR servos.
Verified Owner
Saturday, Jul 31 2021 (4 months ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
I really like the Servo, i use them in the TLR 22 5.0 Buddy, 1/10th scale, they are quick to respond and when racing on a clay track, no problems, nothing really to say that stands out, this is my 3 kit to put together and i have stuck what i am using for each and it works... Perhaps it will change later down the line when i become more involved and more familiar but it works well.
Verified Owner
Wednesday, May 19 2021 (6 months ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Good quality and function, only downfall is that it will not fit the slash 2wd lcg chassis without modificatoin (grinding)
Verified Owner
Thursday, Apr 15 2021 (7 months ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
I installed this on my scx10.3 crawler and it’s ok. Not as much torque as I was hoping for. The overall speed and power is good, similar to the stock Spektrum S614 servo but maybe a but of an upgrade. My rig is very close to 8lbs with wider stance than stock and it can’t turn the wheels when it’s moderately wedged. I think this is a quality unit but be prepared it won’t do slightly more aggressive crawling without some hesitation. I think for comp level crawling or for more aggressive trucks I wouldn’t use this. Maybe for a lighter rig it would work.
Verified Owner
Monday, Mar 15 2021 (9 months ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Guess it's a decent RTR replacement, but it's VERY slow to center. Like will start to center normally, then just stop then start to move slow.. Am I doing something wrong? Spend the extra few bucks and get a 130T or 130SS.
Verified Owner
Friday, Mar 26 2021 (8 months ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
If you happen to burn out the stock servo in your Arrma Granite Voltage and are looking for a replacement then look no further! I bought one of these for just that reason and this little servo is better than what came with my Losi Nitro Truggy RTR. It is testing the holding power of the wheel nuts on my Arrma. Protek is top notch products at a price I can afford. I have started replacing all of my other servos and battery packs to the Protek brand.
Verified Owner
Thursday, Feb 25 2021 (9 months ago)
ProTek RC 100T Standard Digital "High Torque" Metal Gear Servo
Lasted 3 days was very weak from the beginning. It would hardly turn the wheels