O.S. Speed T1202 1/10 Touring

Write the first review
Price: $479.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

This is a O.S. Speed T1202 1/10 Touring Engine. Attention serious touring car enthusiasts: your engine has arrived. The O.S. Speed T1202 ups the ante for race-winning performance, resulting in a power plant that will dominate 1/10 scale competition. When Speed is your engine's first name, you can drive with confidence knowing that cutting-edge O.S. engineering is under the hood.

 

 

Features:
  • Hand-matched cylinder liner and piston for improved fit and seal
  • 12F slide valve carburetor with shorter restrictor for quicker
  • bottom to top throttle response
  • More powerful low to middle range torque
  • Low CG cooling head is even lower than the T1201
  • Rear ceramic ball bearings for reduced resistance
  • Thicker cylinder flange transfers heat effectively to the cooling
  • head
  • Silicone filled tungsten weighted crankshaft
Specifications:
Displacement: 0.128 cu in (2.1cc)
Bore: 0.538" (13.67mm)
Stroke: 0.56" (14.3mm)
Practical RPM: 5,000-45,000
Output: 1.75ps/1.73hp @ 35,000RPM
Weight: 7.58oz (215g)
Crankshaft: UNF 1/4-28
Distance Between Mounting Hole Centers Same Side: 0.43" (11mm)
Distance Between Mounting Holes Opposite Side: 1.2" (31.4mm)
Height Bottom of Mounting Tabs/Top of Cylinder Head: 2.6" (65.9mm)
Width at Mounting Tabs: 1.5" (39mm)
Distance from Backplate to Front Bearing: 2.1" (52.6mm)
Distance from Center of Crankshaft to Front Bearing: 1.4" (34.9mm)
Distance from end of Crankshaft to Backplate: 3.2" (82.1mm)
Crankshaft Size: UNF1/4-28
Crankshaft Length: 1.2" (29.5mm) outside of engine

Carburetor Settings:
NOTE carburetor is preset at factory and requires only very small adjustments

Metering Needle, Flush with slide valve body
Throttle Stop Screw, Approximately 0.5mm visible from carb opening
Needle Valve, Approximately 2-1/2 turns open from fully closed
if engine stalls when warm, close needle valve in 15° increments
until engine runs smoothly.

Includes:
  • Speed Tuned T1202 Touring Car Engine with 12F Carburetor, RP6 Turbo
  • Glow Plug, 5.5mm Carb Reducer, Instruction Manual, Dust Cap Set,
  • Exhaust Seal Ring
Needed to Complete:
  • Glow Fuel: Car blend with 20% nitro content
  • Exhaust system
  • Track equipment

This product was added to our catalog on March 29, 2019