Novak Crusher/4PHD 4 Pole Brushless System w/Simple Tuner

Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

This is the Novak Crusher/4PHD 4 Pole Brushless System. Novak has paired the updated Crusher speed control with the Novak 4PHD 4600Kv 4-Pole sensor-based motor, making the perfect combo for heavy-duty 4X4 applications. Novak’s 4PHD motor provides massive power and torque. Heavy loads, hard throttle and tough conditions are handled with ease. Novak’s rugged, purely sensor-based Crusher ESC, with its Simple Tuner interface, will provide crisp and smooth throttle response. With added features like complete on-board programming, sealed case, auto-detect LiPo cutoff, dynamic timing, ESC thermal protection, and a rebuildable motor, the Crusher/4PHD 4-Pole Brushless System is a great blend of performance and easy-to-use features that is ready to power your project today.


  • Includes Novak's multi-function Crusher ESC and heavy-duty 4PHD 4-Pole brushless motor ideal for 4x4 short course/monster trucks and heavy-duty setups on 2S
  • Sensor-based system for excellent torque and low-speed drivability
  • ESC includes four customizable profiles: Three Standard pre-loaded profiles (Bashing, Racing, Timing Test) and one Crawling profile with crawling modes active (Rock Boost, instant reverse, and hill/hold/drag brake)
  • Extreme-duty, built-in 5A BEC to handle the demands of today's high-powered servos. An external BEC is required for this system on 3S setups
  • Novak X-Drive™ firmware for unmatched throttle response and control
  • Novak Dynamic Timing Advance™ for increased motor RPM
  • Quick and easy on-board programming (no external device needed) with Simple Tuner™ Interface:
    • Brake Tuning: Brake Frequency, Drag Brake, Minimum Brake, Brake Power
    • Drive Tuning: Dynamic Timing (0-35 deg), Timing Range (Low-High), Drive Frequency, & Minimum Drive
    • Additional Tuning: Reverse, Dead Band, Voltage Cutoff (Off/LiPo), Motor Rotation, Data Reset
  • The original, Novak-developed, One-Touch Set-Up™ for quick and easy transmitter set-up
  • Durable ESC design with sealed case, cooling fan and replaceable wire included
  • Completely serviceable and rebuildable motor
  • Auto-detect LiPo Cutoff and ESC Thermal Overload Protection
  • On-board diagnostic temperature monitoring that lets you quickly check the ESC's temperature at any time
  • Meets RoHS compliance and includes 1 year Manufacturers Warranty
  • Designed and 100% tested by Novak in Lake Forest, Calif., using globally-sourced components
  • LiPo recommended for performance setups and when using Dynamic Timing Advance


  • Crusher:
    • Motor Type: Sensored Brushless (540, 550, 4-Pole, Novak Crawling)
    • Fwd/Brk/Rev: Forward / Brake / Reverse (OFF/ON) (Forward/Drag Brake/Reverse when used with a Novak crawling motor)
    • Input Cells (LiPo/Ni-MH): 2-4S* LiPo cells/4-14 NiMH *Maximum input voltage is 2S when using the Novak 4PHD motor that is included in this system (#3087)
    • Size (in/mm): 1.16” x 1.47” x 0.96" (29.5 x 37.3 x 24.4 mm)
    • Weight (oz/g): 1.42 oz. (40.4 g)
    • On-Resistance (ohms): 0.00040 ohms @ 25°C trans. temperature
    • Motor Limit:
      • Brushless 2S: 540-size: 6.5-turn or higher (13.5T or higher crawler); 550-size: 4.5-turn or higher; 4-Pole: 4600Kv or lower
      • Brushless 3S: 540-size: 13.5-turn or higher (18.5T or higher crawler); 550-size: 6.5-turn or higher; 4-Pole: 3500Kv or lower
      • Brushless 4S: 540-size: 13.5-turn or higher (18.5T or higher crawler); Not recommended for 550-size or 4-pole motor
    • BEC (volts / amps): 6.0 volts DC / 5.0 amps (external BEC required for 3S/4S setups)
    • Wire Size (GA): 14G Super-Flex Copper-Strand Silicone Wire
  • Novak 4PHD Motor:
    • Size: 2.62" x 1.41" / 66.5 x 35.9 mm
    • Weight: 8.6oz. / 245g with 6" 12AWG power wires
    • Input Voltage: 2S LiPo / 8.4 VDC
    • Shaft Diameter: 5mm
    • Shaft Length: 0.59" / 15 mm
    • Kv (Unloaded): 4,600 RPM/volt
    • Design: Sensored
    • Mounting: 25mm ř (M3x0.5; M4x0.7)
    • Stator: 12-Slot
    • Magnetic Material: 4-pole, Sintered Neodymium

This product was added to our catalog on September 15, 2014.