Multiplex FunMan RR 95% Assembled Electric Airplane Kit w/Motor, Servos, ESC & Prop

Have fun while you’re learning!

With its big wheels, this high-winger can take off from almost any field. Fast in the air, with good control response and docile handling. Rudder, elevator and throttle controls as standard.

Packed with Plenty!
ELAPOR-Modell 95% factory-assembled, inclusive PERMAX BL-O 2830-1100 motor, speed controller MULTIcont BL-20 SD, assembled propeller 8"x 5, 2 Servos Nano-S, applied decal and comprehensive instruction.

Features:

• Ideal flying characteristics for beginners
• Incredibly compact and robust
• Flight times around 8-10 minutes (3S ~950mAh)
  
• Construction: Elapor foam on the fuselage, wing and tail section
• Wings: One-piece, foam construction with optional aileron control
• Motor: Brushless
• ESC: 20A
• Servos: Two, rudder and elevator control
• Radio Compartment: Foam, sized for high capacity LiPo packs
• Landing Gear: Prebent steel wire with 3" (76mm) foam wheels
• Hardware: Pushrods and other hardware included
• Propeller: 8x5" plastic, black in color with built-in aluminum spinner

Specifications:
Wingspan: 39.8 (1011mm)
Wing Area: 341 sq in (22.02 sq dm)
Wing Loading: 8.7 oz/sq ft (26.55 g/sq dm)
Weight: 20.5oz (581g)
Length: 32.3" (820mm)
Airfoil: Flat bottom, high wing configuration
Center of Gravity: 2.6" (67mm) back from the wing's leading edge at the fuselage sides
Control Throws-

• Elevator, Up & Down: 0.43" (11mm)
• Rudder, Right & Left: 0.24-0.39" (6-10mm)
• Ailerons, up: 0.27" (7mm), down: 0.12" (3mm)

Includes:

• Foam Fuselage
  
• Wings and Tail Section
  
• Prop
  
• Motor
  
• Servos
• ESC
  
• Landing Gear
• Wheels
  
• Instruction Manual
  
• Hardware

Needed To Complete:

• 4-Channel Radio System
  
• 3S 1500-2500mAh LiPo Battery
  
• Compatible Battery Charger
  
• LiPo charge bag and miscellaneous building equipment

Note: This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. Use only a medium CA (CA+) glue and activator. Do not use CA glue designed for polystyrene foam.

This product was added to our catalog on March 11, 2014