MIP Losi 5IVE-T 32mm Big Bore Bypass1 Shock Kit
MIP14370
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons
This is an optional MIP Losi 5IVE-T 32mm Big Bore Bypass1 Shock Kit. Many uncomplimentary words have been used to describe the stock Losi 5ive-T suspension system. As engines and tracks get bigger, and conditions get more demanding, the stock 28mm shock system is limited in what it can do to support a 40 pound rig. Enter MIP's 32mm Bypass1 Shock kit!
With a decisive TQ at the 2014 West Coast Nationals, and a crushing win in the 1/5th Buggy class, the Big Bore 32mm Bypass1 Shock system allows the truck to be more responsive, predictable, and stable. The truck jumps and lands more confidently, and takes corners without bottoming out and flipping over. Tested and proven by MIP’s extensive product development crew, with the race proven MIP Bypass1 system equipped and two sets of springs included, you have the gear you need to set your truck up for any track.
Features:
Includes:
Needed to Complete:
With a decisive TQ at the 2014 West Coast Nationals, and a crushing win in the 1/5th Buggy class, the Big Bore 32mm Bypass1 Shock system allows the truck to be more responsive, predictable, and stable. The truck jumps and lands more confidently, and takes corners without bottoming out and flipping over. Tested and proven by MIP’s extensive product development crew, with the race proven MIP Bypass1 system equipped and two sets of springs included, you have the gear you need to set your truck up for any track.
Features:
- Increased Responsiveness
- Increased Stability
- More Predictable
- Larger Piston = More Pack
- Increased Jumping and Landing Efficiency
- MIP Bypass1™ system = Controllable Rebound Rates
- MIP Bypass1™ Piston system with .005, .007, and .010 Valve Shims
- Hard Anodized Big Bore Bodies
- Anodized Shock and Cartridges Caps
- Two Pairs of F/R Springs
- All Aluminum is 7075
- 100% Made in the USA
Includes:
- (2) MIP Confetti Sticker
- (1) MIP Instructions Sheet
- (1) MIP Bypass1™ Setup Guide
- (8) O-ring 2mm x 31mm
- (4) O-ring 3/32in. x 1 5/16in.
- (4) BHCS 5-40 x .250 Button Head Screw
- (4) Washer .125 x .187 x .031 Nylon
- (4) MIP Bypass1™ Stop Washer
- (4) MIP .005 Blue Valve
- (4) MIP .0075 Matte Valve
- (4) MIP .010 Brown Valve
- (4) MIP Retainer Ring
- (2) MIP Rear Shock Body
- (2) MIP Front Shock Body
- (4) MIP Shock Body Cap
- (4) MIP Shock Body Ring
- (4) MIP Shock Body Cartridge Cap
- (4) MIP Bypass1™ Piston
- (2) MIP Rear Shock Spring 10.0 lb
- (2) MIP Rear Shock Spring 12.0 lb
- (2) MIP Front Shock Spring 7.5 lb
- (2) MIP Front Shock Spring 8.75 lb
Needed to Complete:
- OEM Losi Parts (All OEM parts can be taken from original 28mm shocks)
- Front/Rear shock shafts
- Piston washers
- Shock shaft nuts
- O-rings/center plastic washers
- Shock spring cups
- Shock eyelets
This product was added to our catalog on March 17, 2015