MIP 67mm B6.1/B6.1D "Pucks" 17.5 Bi-Metal Drive System

Read Reviews
Write a Review
Price: $115.50
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons

MIP Pucks 'ARE' the future of Team Associated B6.1D Series Vehicles! MIP’s Pucks Drive system is an aluminum based drivetrain system which includes a 2-piece Aluminum Outdrive Cup and Aluminum Outdrive Hub, 2 Bi-metal bones, and the replaceable plastic orange wear Pucks that take the place of the inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrains overall rotating mass by a whopping 50%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps! Get the advantage that every stock racer craves!

Features: 

  • Aluminum Based Drivetrain and Aluminum based Outdrive Cup and Outdrive Hub
  • Decreases rotational weight of the components by 50%
  • Replaceable Pucks™ to keep your drivetrain fresh
  • 100% Quality made in the USA!

Competitive Advantage:

  • Less Rotating Mass
  • Quicker Acceleration
  • Quicker Deceleration
  • Lower Motor Temps
  • Less Overall Wear and Tear on Drive Components

Includes:

  • 2 - MIP Confetti Sticker
  • 1 - MIP Inst. Sheet
  • 1 - MIP Thread Gel Safety Sheet
  • 1 - Diff Lube & Grease Cup
  • 1 - MIP Lube & Thread Gel Cup
  • 7 - Bearing, 1/16" Chrome Steel Ball
  • 14 - 3/32" Gr. 25 Tungsten Carbide Diff Ball
  • 2 -MIP Modified Diff Ring, Losi 22
  • 1 - Washer, #2, Hardened
  • 1 - Diff Spring, 1/4 x 9/32"
  • 1 -Diff Screw, Shoulder, 2‐56 x .925, Associated
  • 1 - MIP Thrust Retainer, .236 Aluminum Bore
  • 2 - Bearing, 5mm x 8mm x 2.5mm
  • 1 - MIP T‐Nut Housing, .250 Bore
  • 1 - MIP T‐Nut Insert, .250 Bore
  • 2 - SHCS, 1‐72 x .250 Cap Screw
  • 2 - MIP Bi‐Metal R‐CVD Yoke, Front, AE B64
  • 4 - BHCS, 1‐72 x 1/8 Button Head, Alloy
  • 4 - MIP Keyed Drive Puck, Ten SCTE
  • 2 - MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
  • 1 - Support Parts Insert Sheet, Extra Kit Parts
  • 1 - BHCS, 1‐72 x 1/8 Button Head, Alloy
  • 1 - SHCS, 1‐72 x .250 Cap Screw
  • 1 - MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
  • 4 - MIP Keyed Drive Puck, Ten SCTE
  • 2 - MIP Bi‐Metal Outdrive Hub, AE B6
  • 1 - MIP Pucks, 2‐Piece 17.5 Outdrive Cup, Male AE B6
  • 1 - MIP Pucks, 2‐Piece 17.5 Outdrive Cup, Female, AE B6
  • 2 - MIP Pucks™, 17.5 Bi‐Metal Bone, 67mm, AE B6.1

Needed To Complete:

  • .050 Allen Key – (Suggest - MIP9000 MIP Hex Driver Wrench .050 inch)

This product was added to our catalog on May 29, 2018

Rick Clader
Verified Owner
Tuesday, Feb 23 2021 (about 3 years ago)
MIP 67mm B6.1/B6.1D "Pucks" 17.5 Bi-Metal Drive System
Very pleased with the whole experience with amain hobbies from start to finish. MIP 67mm bi-metal system is awesome. Very pleased with the quality and engineering and finish.
Adam Pumneo
Verified Owner
Friday, Sep 18 2020 (about 3 years ago)
MIP 67mm B6.1/B6.1D "Pucks" 17.5 Bi-Metal Drive System
Have not installed yet! Looks like what I need for 17.5 spec racing in my associated b6 based sprint car
Yoshimitsu Funabashi
Verified Owner
Thursday, Jul 18 2019 (about 4 years ago)
MIP 67mm B6.1/B6.1D "Pucks" 17.5 Bi-Metal Drive System
I can tell the obvious improvements for the acceleration and smooth cornering. I should have buy it earlier. Highly recommend!