M2C Racing Rear Toe Block System
This is an optional M2C Racing Rear Toe Block System, and is intended for use with the Team Associated SC10 4x4 1/10 scale short course truck. Designed for maximum strength, these blocks are crafted from 7075 aircraft grade aluminum. They use a captured hinge pin system making toe angle adjustments simple with the removal of only two screws. With the use of tapered ball hinge pins, the system is free floating; if a crash were bad enough to bend the hinge pin, the system will still continue to operate freely since the ball rotates in the bushing and the arm rotates around the pin. If the pin does get bent it will likely occur at the weakest point of the pin which is at the bottom of the taper which is not in the bushing or arm keeping you safe to finish a race. This system also features the ability to rotate the bushing with the notch up giving you -1 degree anti-squat for use on smoother tracks.
This product was added to our catalog on August 16, 2012.