This is an optional M2C Racing Hot Bodies D8 Rear Toe Block System, and is intended for use with the Hot Bodies D8 family of vehicles. These blocks are made 7075 aircraft aluminum for maximum strength. They are a captured hinge pin system which makes changing the toe easier by simply removing two screws on the back and loosening the two bottom screws. The use of the tapered ball hinge pins give the user a very free floating system that will, if a crash is bad enough, bend the hinge pin. The system will continue to operate freely as the ball can still rotate in the bushing or the arm can rotate around the hinge pin. If the pin does get bent it will likely occur at the weakest point on the pin which is at the bottom of the taper. This area is not in the bushing or in the arm, allowing the system to still function.
Includes:
- (1) C Block
- (1) 3.5 Toe Block
- (2) Hinge Pins
- (1) Pack of long life delrin bushings:
- (4) 1 DOT Bushings
- (4) 2 DOT Bushings
- (4) 3 DOT Bushings
- (4) 1/4° Bushings
- (4) 1/2° Bushings
This product was added to our catalog on March 7, 2011