M2C Kyosho TKI Buggy Front Hinge Pin Support Kit

This is an optional M2C Front Hinge Pin Support Kit for the Kyosho TKI series. These hinge pin blocks are made using 7075-T6 aluminum alloy and have a captured back to prevent the pin from pushing thru the bushing. The tapered ball hinge pins are made using 01 hardened tool steel and are designed to rotate in the bushings. If in the event you bend a pin, they will still work properly. The inserts are made using delrin material for long wear.

In the "A" Block, M2C has provided three different sets of inserts; these inserts are made square which will allow you to rotate the bushing at 90 degrees to give you more options on set up.

M2C6735 is 1 degree up and 1 degree out; this is the stock setting for the TKI4. 1 degree up and 1 degree in are the stock settings for the TKI3 car.

M2C6732 will allow you to set the width between the TKI3 and TKI4. This bushing can also be rotated 90 degrees to allow you to run less anti-dive if you like.

M2C6731 will allow you to run on centerline for more control of the anti-dive.

For the "B" Block, the stock setting is M2C6735 rotated out for the TKI4; bushing rotated in will be the stock setting for the TKI3. The "B" block inserts can can be rotated like the "A" block for more adjustment.

This product was added to our catalog on December 28, 2018