M2C JQ 16mm "ZRS" Zero Rebound System Shock Caps (4)

M2C JQ 16mm "ZRS" Zero Rebound System Shock Caps allow you to build an emulsion style zero rebound shock and use the stock JQ shock cap bushings. Combine with the M2C 16mm o-ring shock pistons (M2C9650) for improved handling and more stability when landing off jumps.

TIP: It is easier to remove the bushing from the old cap with the cap still on the shock.

Instructions:

• Remove bleeder screw. Fill with oil to level with top of shock. Screw cap onto shock.
• Slowly push piston shaft up to top of stroke. Hold shaft straight up and install 2mm screw. It is best to put screw in with a wrench and not a driver to avoid cross threading the screw.

NOTE: It is a good idea to check the shocks and re-bleed if necessary to keep from building pressure due temperature changes during the day. This can also happen if you have a lower shock o-ring that is leaking.