Lunsford Associated RC10B6.4 "Super Duty" Titanium Turnbuckle Kit

Lunsford Associated RC10B6.4 "Super Duty" Titanium Turnbuckle Kit. These optional turnbuckles are recommended for use on high bite clay, AstroTurf or carpet. Made for the Team Associated B6.4 and B6.4D, these turnbuckles include the needed drill bit to allow the turnbuckles to be installed.

Rod End Resizing:
The inner diameter of the rod ends will need to be enlarged with the supplied 1/8" drill bit. A small cordless drill on a slow speed is recommended for best results. Use a paper clip or similar item to first measure the depth of the threads in the rod end. Use that measurement to mark the drill bit or use a pinion gear to act as a depth stop. This will ensure you do not drill beyond the existing depth of the rod end.

NOTE: The turnbuckle sizes below are different than stock lengths to better suit different adjustment settings and proper turnbuckle to ball cup engagement. 

Features:

• Grade 5 Titanium is roughly a 45% weight savings over steel 
• Anti-corrosion properties are greater than stainless steel 
• Nano accurate thread rolling process
• Made in the USA

Includes:

• (2) 3.5mm x 52mm SUPER DUTY Titanium Turnbuckles (Steering)
• (2) 3.5mm x 50mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
• (2) 3.5mm x 48mm SUPER DURY Titanium Turnbuckles (Front Camber)
• (1) 1/8" Drill Bit