Lunsford Associated RC10B6.3D "Super Duty" Titanium Turnbuckle Kit (6)
LNS36209
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Lunsford Associated RC10B6.3D "Super Duty" Titanium Turnbuckle Kit. These optional turnbuckles are recommended for high bite clay, AstroTurf or carpet. This turnbuckle set is made from 3.5mm diameter titanium and includes the needed drill bit to allow for these super strong and light turnbuckles to be installed.
Rod End Resizing:
The inner diameter of the rod ends will need to be enlarged with the supplied 1/8" drill bit. A small cordless drill on a slow speed is recommended for best results. Use a paper clip or similar item to first measure the depth of the threads in the rod end. Use that measurement to mark the drill bit or use a pinion gear to act as a depth stop. This will ensure you do not drill beyond the existing depth of the rod end.
NOTE: The turnbuckle sizes below are different than stock lengths to better suit different adjustment settings and proper turnbuckle to ball cup engagement.
Features:
Includes:
Rod End Resizing:
The inner diameter of the rod ends will need to be enlarged with the supplied 1/8" drill bit. A small cordless drill on a slow speed is recommended for best results. Use a paper clip or similar item to first measure the depth of the threads in the rod end. Use that measurement to mark the drill bit or use a pinion gear to act as a depth stop. This will ensure you do not drill beyond the existing depth of the rod end.
NOTE: The turnbuckle sizes below are different than stock lengths to better suit different adjustment settings and proper turnbuckle to ball cup engagement.
Features:
- Grade 5 Titanium is roughly a 45% weight savings over steel
- Anti-corrosion properties are greater than stainless steel
- Nano accurate thread rolling process
- Made in the USA
- (2) 3.5x48mm Titanium Turnbuckles (Steering)
- (2) 3.5x46mm Titanium Turnbuckles (Rear Camber)
- (2) 3.5x44mm Titanium Turnbuckles (Front Camber)
- (1) 1/8" Drill Bit
- (2) Decal Sheets
This product was added to our catalog on July 9, 2021