Lunsford 3.5mm B6.1/B6.1D "Super Duty" Titanium Turnbuckle Set

This is an optional Lunsford 3.5mm "Super Duty" Titanium Turnbuckle Set for the Team Associated B6.1 and B6.1D buggies. 

Lunsford turnbuckles are CNC machined and thread rolled from domestic US 6AL/4V grade titanium. If you want to put your car on a diet, this is one of the best places to start eliminating weight, without sacrificing strength.   

Features:

• Grade 5 Titanium is roughly a 45% weight savings over steel.
• 3.5mm SUPER DUTY size increase strength and rigidity over 3mm size turnbuckles.
• Always and only domestic Grade 5 (Ti-6Al-4V) Titanium.
• Nano accurate threading process.
• A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
• Machined from Made in the USA center-less ground titanium.

Includes:

• (4) 3.5mm x 48mm Titanium Turnbuckles (Rear/Front Camber)
• (2) 3.5mm x 51mm Titanium Turnbuckles (Steering)
• (1) 1/8" Drill Bit
• (1) Super Cool Lunsford Decal

Total Weight of Turnbuckles:

• 11.2 grams

Rod End Resize NOTE: Increase the inner diameter of your rod ends with the supplied 1/8" drill bit. A small cordless drill works best on a slow speed. Use a paper clip or similar item to first measure the depth of the threaded area of the rod end. Use that measurement to mark the drill bit to ensure you do not drill beyond the existing depth of the rod end.

This product was added to our catalog on August 1, 2018