King Headz Jammin X1-CRT Extended Motor Mount - Most Engines (Black)
HDZ-KP-715-N
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Jammin X1-CRT Extended Motor Mounts from King Headz for Novarossi motors and most other motors (including the Picco .28)! This motor mount is specifically designed for the Jammin X1-CRT trucks with an extended motor mount plate that extended past the engine clutch bell to eliminate chassis flex around the engine and eliminates the chassis Z-brace. This motor mount has engine spacing holes 37.5mm apart and should fit most big block engines.
This Mount is CNC machined from 7075 aircraft grade aluminum and Anodized black. These are designed with a base mount and removable top blocks. Once the mount is installed in the vehicle and the gear mesh is set you can remove and reinstall the motor without resetting the mesh. This mount has an extended leg that mounts in the chassis holes used with the Z-Brace. This will help to reduce chassis flex near the flywheel hole. Extra mounts are offered so that other motors can be swapped out quickly.
Fits Jammin X1-CRT family trucks with Novarossi and OS Engines. Does NOT fit the Picco .21 to .27 engines, but does fit the Picco .28 engines. To be 100% sure this fits non Novarossi motors, check that the engine mount spacing on your engine will with with mounting holes that are 37.5mm apart.
INCLUDES:
(1) Base Mount
(1) Set of top blocks
(4) M3 x 14MM Alloy Allen Head Screws (mounts top blocks to base)
(4) M3 lock washers (used with M3 x 14MM screws)
(4) M3 x 10MM Alloy Allen Head Screws (mounts motor to top blocks)
(2) M3 Nylon Lock Nuts
(2) M3 x 16MM Alloy Flat Head bolts
SPECS.
Material: 7075 Aircraft Billet Aluminum
Weight: 30.50 grams (base and 2 top blocks - no hardware)
This Mount is CNC machined from 7075 aircraft grade aluminum and Anodized black. These are designed with a base mount and removable top blocks. Once the mount is installed in the vehicle and the gear mesh is set you can remove and reinstall the motor without resetting the mesh. This mount has an extended leg that mounts in the chassis holes used with the Z-Brace. This will help to reduce chassis flex near the flywheel hole. Extra mounts are offered so that other motors can be swapped out quickly.
Fits Jammin X1-CRT family trucks with Novarossi and OS Engines. Does NOT fit the Picco .21 to .27 engines, but does fit the Picco .28 engines. To be 100% sure this fits non Novarossi motors, check that the engine mount spacing on your engine will with with mounting holes that are 37.5mm apart.
INCLUDES:
(1) Base Mount
(1) Set of top blocks
(4) M3 x 14MM Alloy Allen Head Screws (mounts top blocks to base)
(4) M3 lock washers (used with M3 x 14MM screws)
(4) M3 x 10MM Alloy Allen Head Screws (mounts motor to top blocks)
(2) M3 Nylon Lock Nuts
(2) M3 x 16MM Alloy Flat Head bolts
SPECS.
Material: 7075 Aircraft Billet Aluminum
Weight: 30.50 grams (base and 2 top blocks - no hardware)
This product was added to our catalog on January 25, 2006