KDE Direct UBEC22 Universal 22 Amp BEC

KDE Direct
KDEXF-UBEC22
Discontinued
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The KDE UBEC series is compatible with 2S - 8S LiPo (8.4V to 33.6V) power systems - allowing for clean, voltage-regulated power for critical flight electronics and peripheral equipment (including 12V aerial photography and high-end sUAS equipment). The UBEC22 is designed to eliminate the need for an external battery pack, and allows for simple adjustment of the regulated output voltage for direct compatibility to your electronics and power applications. Three (3) power-output leads are provided as standard, preventing the need for any wire-harnesses or additional soldering when using high-powered electronics up to 10A continuous and 22A+ peak currents.

The series is designed  for operation of multiple electronics and other high-power systems; commonly needed when linear BECs are not capable of handling the power requirements (such as those included in many off-brand ESC's) or when using high-grade, OPTO-isolated ESCs (such as the KDE Direct XF UAS Electronic Speed Controller (ESC) Series). The UBEC allows for selection of four voltage ranges: (1) 5.0V, (2) 6.0V, (3) 8.0V, and (4) 12.0V - providing voltage-regulated and extremely low-noise power for flight controllers, servos, and even cinema-grade aerial-photography applications.

KDE UBEC's include 200C, 20 AWG silicone-wire power-input leads and 22 AWG silicone-wire power-output leads (triple-format) with standard servo-lead connectors pre-installed. ф3.5mm and ф4.0mm 24K matching Bullet Connectors are included for the power-input leads; providing simple plug-and-play compatibility with most power-distribution boards and sUAS applications.

Specifications:
Maximum Current*: 22 A (5s Burst)
Maximum Power: 264 W (5s Burst)
Continuous Current*: 10+ A
Continuous Power: 120+ W
Maximum Efficiency: > 98%
Voltage Input Range: 8.4 V (2S) - 33.6 V (8S)
Programming: User-selectable voltage regulation: 5.0V, 6.0V, 8.0V, 12.0V
PCB Size: 24.5 mm (W) x 50 mm (L)
UBEC Weight: 25 g (36 g with Wires/Bullets)
Power Input Leads: 20 AWG, 200C
Power Output Leads: 22 AWG, 200C
Power Input Connects: ф3.5 / ф4.0mm Matched Pair
Power Output Connects: Triple, 3-Wire JR

*NOTE: UBEC requires consistent airflow (5 mph or greater) across the heatsink to maintain continuous and maximum amperage ratings during operation. Increasing airflow or adding additional cooling can further increase the capabilities of the device and extend the lifespan of the critical internal components.

Includes:
  • (2) KDE Direct XF ф3.5mm 24K Bullet Connectors (Pair, Male/Female)
  • (2) KDE Direct XF ф4.0mm 24K Bullet Connectors (Pair, Male/Female)

This product was added to our catalog on January 19, 2015.