JConcepts B74 Aluminum Rear Hub Carriers (Blue)

Read Reviews
Write a Review
JConcepts B74 Aluminum Rear Hub Carriers (Blue)
Back Order Now
You may back order this item and it will ship when it arrives.
$2.99 flat rate shipping! Learn More
Price: $28.49

Please Log in to receive a notification when this item arrives in stock.

Save In List
This item earns up to 28 VIP Reward Points Learn More
JConcepts B74 Aluminum Rear Hub Carriers are precision machined to accept the stock AE hub inserts and also the aluminum camber link mount. One of the highest impact items on the rear of the B74 are the hub carriers and the aluminum material helps maintain correct geometry while showing off some anodized luster.

The package contains the hub carriers and two .1 and two .25mm axle shims to tighten the lash between drive axle and bearing once assembled. Once the assembly is together and the hex adaptor secured it’s time to add other pre-existing components. Slide the plastic hub inserts in the hub while carefully watching the alignment and setting of the hub carrier position. Next, use the standard FHCS hub carrier screws and aluminum camber link mount and then choice of spacer to determine setup positioning.

Features:
  • Precision machined aluminum
  • Lightweight / durable design
  • Chamfer highlight edging
  • Available in blue anodized color
  • Aesthetic, race- ready jewelry

This product was added to our catalog on June 25, 2020

T
Verified Owner
Friday, Feb 12 2021 (about 3 years ago)
JConcepts B74 Aluminum Rear Hub Carriers (Blue)
Absolute trash, stay away from jconcepts aftermarket parts like this. This is 3 of 3 with them for me. First off these B74 hubs didn't include the shims for the bearings so there's tons of slop there, they needed extra machining above inside bearing for the camber link mount to fit and needed drilled and tapped for set screws in the insert area because of the slop there also. On the new B6.2 hubs I had to drill and tap for set screws in insert area because of all the slop the insert had on those hubs. I had to drill the hinge pin holes out for the hinge pin to even fit on their steel 28g B6/T6 bulkhead. Never again...