JConcepts B6/B6D/B74 Fin Long Titanium Shock Standoffs w/Bushing (Front/Rear)

This is an optional pack of JConcepts Front or Rear B6/B6D Fin Long Titanium Shock Standoffs with Bushings, intended for use with Team Associated RC10 B6, B6.1, B6.1D and B74 kits. The Fin Titanium items replace the standard parts and feature a light-weight design. Built-in threads are more easily adjustable than their counterparts for less frustration when tweaking your build. The 7mm hex based design allows adjustment with the most popular wrench in the R/C arsenal but also tapers down featuring the Fin treatment found on the JConcepts turnbuckles.

White Delrin pivot bushings are high quality and greatly reduce friction.  The bushings are precision machined to slide on and off the titanium and allow the shocks floating freedom and just the correct amount of fore and aft movement. The bushings are asymmetrical; one-side features a taller shoulder which should be positioned toward the shock tower position on the vehicle. This taller shoulder helps maintain the shock in the correct position without falling back on to the stand-off itself. The two piece set includes two 3x8mm BHCS to secure the stand-offs to the shock tower. In addition, the set includes two aluminum washers, 2mm in thickness, which allow the titanium to be adjusted and used on the F&R of the B6.1 and B74 vehicles. The standard 3mm locknut is used to finalize the assembly and secure the shock into position.

Features:

• Direct fit for the F&R tower on the B6.1 | B74
• Original JConcepts design and “Fin” styling
• High-grade, machined titanium material
• 7mm Hex base material for ease of adjustment
• Built-in threads for weight reduction
• 3x8mm BHCS hardware included
• Aluminum 2mm spacer for adjustable length
• Machined Delrin pivot bushings

Includes:

• (2) Shock Standoffs
• (2) 3x8mm BHCS
• (2) Aluminum washer (2mm)
• (2) Delrin pivot bushing