JConcepts A-One Touring Car Body (Clear) (190mm)
The JConcepts A-One Touring Car Body was designed and developed to compete at the highest level, incorporating the latest benefits of computer aided design with experience, patience and championship level results. Weight is always a huge concern and the A-One body hits the scales very lightly with its trim design and feathery materials. The ROAR approved design pushes the limits in every dimension while utilizing a crafty chin spoiler, rolled wheel wells, heavy recessed grille, lights and a position savvy windshield angle. The B-pillar splits the windows like a knife and the dome shaped roof provides just enough height to meet those technical standards.
Just behind the rear window, the rear deck lid is cropped and the wing stanchions are blended into the body for stability and function. The rear bumper treatment adds length to the rear fenders and a cut-line in the back of the body promotes an air-escape passage for the most high-speed circuits. Along the side panels, a hard body line transitions from front to back with an increased angle joining the front and rear wheel openings. This detail allows the A-One body to maintain strength in a high-impact, high-force area during hard cornering and small impacts with other vehicles.
Included in each body set, a JConcepts A-One decal sheet and paint mask for all windows. The rear wing option includes two styles, first a standard lip design and a gurney option for the ultimate rear down force tuning. To attach the rear wing, 3mm mounting hardware and plastic nuts are included to complete the light-weight assembly. As always, each body set is backed with JConcepts customer support and racing heritage.
The A-One body is built for all 190mm width touring car vehicles. Standard thickness is comparable to all sturdy racing bodies on the market. Light-weight is a thinner gauge material, most often used on the world racing scene for the most experienced or weight-conscious racers. Wheel well openings are pre-marked on the clear body (253.5mm), however, depending on the length of the vehicle, these may be altered slightly by the user. The rear wings are 180mm wide each with one featuring a slight gurney for added rear grip. ROAR approval was complete in September of 2017. The body currently fits into all ROAR specifications and is legal for use in sanctioned events.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
This product was added to our catalog on October 25, 2017