HPI Flux EMH-80A Brushless Waterproof ESC

HPI Flux EMH-80A Brushless Waterproof ESC
Price: $88.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons
The HPI Flux EMH-80A Brushless Waterproof ESC offers the capacity to handle 2S and 3S LiPo power, the Flux EMH-80A ESC is the perfect match for the MMH-4000KV 1/10th scale brushless motor (HPI112850). Complete waterproof protection means you can use your car equipped with the Flux EMH-80A in the wettest of conditions, or  when the weather's warm, a large fan sits on top of the case inside a protective cover to keep things cool.

Features:

  • Waterproof* and dust-proof. The ESC has been designed to work in wet conditions. *Please remove the cooling fan when using the ESC very wet conditions. After using the ESC in wet conditions, please clean and dry it to avoid the oxidation to copper connectors
  • 2S-3S capable
  • Compatible with sensorless brushless motor
  • 3 running modes (“Forward with Brake” mode, “Forward/Reverse with Brake” mode, and “Rock Crawler” mode).
  • Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment
  • 9 Punch modes from “Soft” to “Very aggressive” to be suitable for different chassis, tires and tracks
  • Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection
  • Easily programmed with the “SET” button on the ESC
Specification:
  • Continuous Current: 80A
  • Burst Current: 540A
  • Resistance: 0.0004 ohm
  • Application: 1/10 scale On-Road and Off-Road
  • Motor Limit:
    • 1) 2S LiPo/6 cell NiMh; On-Road: ≥ 5.5T; Off-Road: ≤ 6000Kv; 3650 Size Motor
    • 2) 3S LiPo/9 cell NiMh; On-Road: ≥ 8.5T; Off-Road: ≤ 4000Kv; 3650/3660 Size Motor
  • Battery: 4-9 cells NiMh or 2-3S LiPo
    • 1) For 4-6 cells NiMH or 2S Lipo: You needn't change the 5V cooling fan on the ESC;
    • 2) For 7-9 cells NiMH or 3S Lipo: You must change the original 5Vcooling fan to 12V cooling fan, or supply the 5V cooling fan from the receiver (5-6V)
  • Built-in BEC: 6V/2A Switching
  • Program Port: Multiplexed with cooling fan port
  • Motor Type: Sensorless Brushless
  • Dimension: 46x34x35mm
  • Weight: 82g

This product was added to our catalog on February 15, 2018