Categories related to this product

Hobbywing XRotor Micro 4in1 ESC & F4 G3 Flight Controller Combo

Write the first review
Hobbywing XRotor Micro 4in1 ESC & F4 G3 Flight Controller Combo
Price: $79.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The Hobbywing XRotor Micro 4-in-1 ESC and F4 G3 Flight Controller Combo is composed of HWA31003001 & HWA30902063. 

Flight Controller Features:
  • STM32 F405 MCU.
  • Board load 12V BEC, the output current can reach 2A. It can supply power for graphic transmission, 12V LED lamp and other equipment
  • The SPI ICM-20602 which integrates accelerometer and gyro (with the running frequency can be set to 32KHz) is adopted
  • Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software (Note: the OSD is controlled by the F4 MCU)
  • The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race
  • F-card which can record and save more flight/black box data allows users to adjust thesetup of their aircraft easily
  • Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc
  • LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC
  • Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port , extra current meter is needed)
  • Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft
  • Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters
  • Switch module of board load graphic transmission(VTX) can use remote contorl to control switch of graphic transmission
ESC Features:
  • BLHeli_32 DShot 1200 ESC
  • Dual 5V BEC Outputs
  • Voltmeter Module
  • Rubber Isolated Mounts
Flight Controller Specifications:
Specifications:   
Continuous Current: 60A  
Input Voltage: 3s-6s LiPo   
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm   
Supported Firmware: BLHeli_S32   
Weight: 15g

4-in-1 ESC Specifications: 
Continuous Current: 60A  
Input Voltage: 3s-6s LiPo   
BEC Output: 5V & 0.6A
Size (LxWxH): 52x42x6.6mm   
Supported Firmware: BLHeli_S32   
Weight: 15g


This product was added to our catalog on October 3, 2019