Hobbywing QuicRun Fusion Pro FOC 2-in-1 ESC & Motor System (2300Kv)

I love this motor, it is so awesome,the low speed control is just insane. I can get my trx4 blazer, which weighs around 13 pounds, to move so slow you might as well watch the grass grow. Yet stick it in 2nd gear and rip a massive wheelie. I was running 1080 hobbywings with holmes hobbies crawlmasters, which is an awesome set up. But I think I'm slowly gonna convert all my crawlers to this set up.
As for people saying you have to order the card to program it, if you have a 1080 or a different kv fusion the card thays with those will work. My 1080 program card worked just fine and saved me from needing to purchase a separate card. Seeing as I have 6 1080 set ups I can spare a card to tune this

I purchased this for a Gmade R1 and it fits perfectly in the tiny chassis. There’s enough room left over I can carefully tuck a tiny 3S 1300mah Lipo in the cage. It’s so quiet I can sneak up on my sleeping dog and run over his tail b4 he even knows what happened. This a great motor for limited space and has awesome control and even better start up. I don’t even notice the slop in the drivetrain. It’s a great motor buggy combo to toss into a backpack and go hiking with. It’s not gonna climb a vertical rock face but it’s perfect on the hiking trails where I go. I highly recommend this Fusion 2-in-1

I use this in my crawler and the power is smooth. What I real like about it is how clean it make the build and eliminates a lot of wires.

This is such a great system! As others have stated the low speed control and the power are amazing! If you're reading this and haven't ordered one, do it, as soon as it's back in stock! That speaks volumes also! Amain is awesome! Keep up the great work team!

works very well. the drag brake/hill hold is very impressive only thing that would make this thing slide is the tires losing grip. take it from the box and install in truck I have 2 of these 2 different truck completely different applications and haven't even plugged it in to tune it. Very user friendly so simply. BOX TO TRUCK TO CRAWL!

I already have 2 of the Hobbywing Fusion 1800kv systems in 2 other rigs and they’re nothing short of amazing. I replaced one of the 1800kv models for the 2300kv Pro because I wanted some extra wheel speed. Can size is smaller (between a regular 540 motor and a 550 motor) which will help if you have an application in which a 550 won’t fit. The 2300 seems to be just as impressive with low speed control and has an amazing drag brake just as the other Fusion motors. Best bang for the buck if looking for a seriously capable crawler motor/esc. Amain got it to my door quickly which is a bonus!

Had a total of 2 days and was loving it while testing it out at home, then I went and actually ran it out at my local crawling spot and ran it for a couple hours then switched to a different truck. After awhile I switched back to the truck that had this system in it and I turned it on it made the start up noises and then made a whining noise for 5 seconds and put in a pretty gnarly smoke show…. Another 5 seconds and I bet my battery woulda gone up and I would almost my whole truck…

Louder than the 1800kv, but just as impressive. No program box is included with this, but there is a sticker included if you have one already. Also note that the lcd program box does NOT work with this.

Don't forget to order an LED programming card...unless you already own one. The Fusion Pro 2300KV is sold with no programming card.
I already had HW LED cards so it was no biggie in the end.
Mounted in a TRX4 Sport with front overdrive, stock 17t pinion & 39t spur.
These motor/esc's are just amazing in my opinion. So, so smooth...especially at low throttle. It's hard to put into words the amount of control you have.
I was hesitant to try the Fusion systems at first. I have a 2800kv Axe 540 installed in one of my trucks and it is flat out amazing. So I saw no reason to go away from that. The Fusion Pro is easier to install since there is no ESC to wire up and mount. Just mount the motor to your motor mount and arrange the wires neatly, Done! Go play.
The 2300kv power is really good and plenty of "too much power" for a typical crawler. I'm glad I held off from the 1800kv Fusions and got the 2300kv, but the 1800kv works just as awesome. I would probably not be able to tell the difference in 500kv.
Should've bought two since they sold out so fast.
Props to Amain Hobbies as always! I don't know how you guys do it, but please keep on keepin' on. Up to date stock and quick shipping.

So far this setup an amazing! Suuuper duper slow accurate slow speeds! Always gets my decently weighted trx4 out of its way! Never over heats! (full throttle snow donuts till the battery’s dead) Pretty light and tidy setup with the 2in1 vs motor, esc, wires. If you are thinking about a brushless setup for your crawler there are only two choices! The fusion 2300kv or 1800kv for about half the price.

Installed in TRX4 on 9 tooth pinion WOW! Plenty of power and amazing snail speed crawling.

This motor was a game changer.Low end controllable tork is awesome.High end speed still there .Easy installation, was quick like leval one .Get the programming card I am 62 and still figured it out .Lots of great info on the web for set up

Very good trail rig. The 2-in-1 makes install a snap. We have these in our TRX-4 Sports. Does not come with program card. FYI the AXE version with FOC has built in Bluetooth, so a card is not necessary.

Best modification ive done yet!!
I will buy more of these. Full creepy crawl mod to bouncer! With control.

Amain Hobbies 2 thumbs up all around service always delivering the goods

Really worth your buck!! Was a direct fit in my trx4 defender, only issue was that I needed the program card but no big deal, also amain hobbies I am most satisfied with your service?

Really great product. Loved putting it in. Works great on the Capra, however for those putting it in with a stock skid and stock transmission, it will not fit. You need to buy a flat skid to get it to fit. I would recommend this for any crawler.

Best motor I have ever used so far. I absolutely love it. Programing is great. Not to mention Amain Hobbies. Love this store, so easy to order from and so quick with shipping. My "go to" when I need something now. I have Fast Track Hobbies in Rocklin Ca. but The last 3 times I have been there I have struck out, meaning they didn't have what I needed. AMain always has what I'm looking for.

I love this combo (my third unit) - it does everything so well and seamlessly. And this versions easily fits the Vanquish Phoenix with no modifications. Highly recommend.

It did fry my throttle channel on my stock receiver. Not sure why. Replaced the receiver and it has been flawless. Best bang for buck paired with easiest install out there.