This is the Hobbywing EZRun SC8 Waterproof Brushless ESC & 1/10 Scale 4000kV Motor Combo, with an included Programmer Box. This all-in-one solution provides a waterproof power system great for sport short course, buggy or monster truck applications. This combo includes an ESC built to withstand 1/10 and 1/8 scale abuse, but a motor best suited towards 1/10 scale applications. And for the additional ease, this combo also includes a friendly programer box with an easy-to-use interface.
- Most suitable for short course trucks and buggies.
- ESC is completely water-proof and dust-proof.
- Powerful built-in switching mode BEC.
- Excellent start-up, acceleration and linearity features.
- Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
- Electric brake function, also compatible with mechanical disc-brake system.
- Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
- Internal timing can be changed easily to make the ESC suitable for various of motors.
- Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
- Special program port for easily setting the ESC.
- ESC firmware can be updated through the USB adapter in the LCD Program Box.
- Mounting stand for installing the ESC on chassis easily and firmly.
- Top quality motor:
- Aluminum shell (case)
- High quality magnets
- Copper wires of high temperature endurance
- Good quality bearings
- 4 poles motor has very high efficiency and big power output.
Output: Continuous 120A, burst 760A;
Input: 6-12 cells NiMH/NiCd or 2-4S Lipo;
BEC Output: 6V/3A (Switching mode), *See Note #1 Below
Resistance: 0.0004 Ohm
Motor Supported: Sensorless Brushless Motor
Suitable Brushless Motor:
- With 6 cells NiMH/NiCd or 2S Lipo: KV≤6000;
- With 7-9 cells NiMH/NiCd or 3S Lipo: KV≤4000;
- With 10-12 cells NiMH/NiCd or 4S Lipo: KV≤3000;
Suitable Car: 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT)
Size (LxWxH): 59x38x34mm
*Note #1: The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC.
Shaft Diameter: 3.17mm
Shaft Length: 18.0mm
Rotor Poles: 4
Max Input Voltage: 2-3S LiPo
Applications: 1/10 scale 2WD/4WD SC/Buggy/Monster Truck
Program Box Specifications:
Input Voltage: 4.8-6V
- (1) EZRun-WP-SC8 Electronic Speed Control
- (1) EZRun-3656 4000kV Motor
- (1) LED Program Box