Helion RC Conquest 10B XB Brushed 1/10 RTR 2WD Electric Buggy w/2.4GHz Radio, Battery & Charger
The CONQUEST 10B XB - Tame the Terrain
Starting with the high-performance 540 brushed motor and water-resistant electronics, the first thing thatíll grab you is the 10Bís surprising speed with the included Helion 6-cell NiMH pack. But thatís not the half of it. As a Conquest 10B XB owner you can also look forward to the sort of class-leading balance, durability and handling thatís only possible with its four-wheel independent suspension, adjustable oil-filled, coil-over shocks, wide track LCG (low center of gravity) chassis, all-terrain tires, light and impact-resistant composite construction, and rugged drivetrain, complete with slipper clutch. Add an aggressive forward cab body, striking graphics and high grip all-terrain tires, and the result is a ready to run car thatís as comfortable flying jumps as it is kicking dirt in the headlights of the opposition.
- Ready To Run: The Conquest 10MT XB is supplied 100% factory assembled and ready to run. Included is a brushed power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ĎAAí batteries for the transmitter.
- Dust Cover: When youíre out bashing and scribing doughnuts in the dirt youíll really appreciate the extra protection provided by the MTís close-fitting dust cover.
- Adjustable Suspension: Anodized aluminium caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.
- Non-integrated Electronics: In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and increase upgrade / tuning options.
- Slipper Clutch: Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.
- IKONNIK ET3 Transmitter:
- 2.4GHz operation avoids conflicts with other users.
- Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
- Low voltage warning.
- Switched third channel.
- Ergonomic grip, trigger and steering wheel.
- Steering dual rate.
- End point adjustment.
Motor: 540 brushed
ESC: 40A brushed
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 480mm (18.9in)
Height: 180mm (7.1in)
Width: 330mm (13.0in)
Wheelbase: 282mm (11.1in)
Weight (approx): 2.2Kg (5.1lbs)
Pair with: IKONNIK Krypton protocol
- Conquest 10MT XB
- ET3 3-channel 2.4GHz transmitter
- 2000mAh 6-cell 7.2V rechargeable NiMH battery
- Mains battery charger
- Quick-Start Guide
Needed To Complete:
- (4) "AA" Batteries (for transmitter)
This product was added to our catalog on July 5, 2017.