Helion Conquest 10ST XB 1/10 RTR 2WD Stadium Truck w/2.4GHz Radio, Battery & Charger
Starting with the high-performance 550 brushed motor and water-resistant electronics, the first thing thatíll grab you is the 10STís surprising speed with the included Helion 6-cell NiMH pack. But thatís not the half of it. As a Conquest 10ST XB owner you can also look forward to the sort of class-leading balance, durability and handling thatís only possible with its four-wheel independent suspension, adjustable oil-filled, coil-over shocks, wide track LCG (low center of gravity) chassis, all-terrain tires, light and impact-resistant composite construction, and rugged drivetrain, complete with slipper clutch. It all amounts to a car that handles well and fully delivers on its promise of beginner-friendly performance. It is, in short, the perfect place to start.
Helion Brushed Power System
Equipped with a high-performance Helion 550 brushed motor and 40 amp all-weather ESC, you can be assured of speed and a healthy acceleration no matter what the conditions. Best of all, when youíre ready for even more performance, fitting a Helion brushless upgrade is simplicity itself.
- IKONNIK ET3 Transmitter:
- 2.4GHz operation avoids conflicts with other users.
- Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
- Low voltage warning.
- Switched third channel.
- Ergonomic grip, trigger and steering wheel.
- Steering dual rate.
- End point adjustment.
- Ready To Run: The Conquest 10ST XB is supplied 100% factory assembled and ready to run. Included is a brushless power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ĎAAí batteries for the transmitter.
- Slipper Clutch: Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.
- Maintenance Made Easy: With hex bolts throughout, plus removeable front and rear chassis plates, maintenance is both convenient, quick, and cost effective.
- Adjustable Suspension: Anodized aluminium caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.
- Non-integrated Electronics: In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and upgrade / tuning options high.
Motor: 550 brushed
ESC: 40A brushed
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 400mm (15.7in)
Height: 150mm (5.9in)
Width: 300mm (11.8in)
Wheelbase: 282mm (11.1in)
Weight (approx): 1.74Kg (3.8lbs)
Pair with: IKONNIK Krypton protocol
- Conquest 10ST XB
- ET3 3-channel 2.4GHz transmitter
- 2000mAh 6-cell 7.2V rechargeable NiMH battery
- Mains battery charger
- Quick-Start Guide
Needed to Complete:
- (4) "AA" Batteries (for transmitter)
This product was added to our catalog on December 9, 2016.