HB Racing One Piece Aluminum Motor/Differential Mount
HBS67585
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is a replacement aluminum motor/differential mount from Hot Bodies. This mount in intended for use with the Hot Bodies Ve8 1/8th scale electric buggy.
This product was added to our catalog on May 28, 2010
Hunter C.
Wednesday, Aug 3 2011 (about 12 years ago)
HB Racing One Piece Aluminum Motor/Differential Mount
This motor mount is terrible! The popular 2200kv nue/castle motor does not fit without a ton of dremeling. The aluminum is high quality, but not worth the hassle. You must use the HB skinny pinions on this too. Stock is way better!
Shih Fong Huang
Sunday, May 30 2010 (about 13 years ago)
HB Racing One Piece Aluminum Motor/Differential Mount
If you guys use Tekin T8 motor, you need to remove front brake disk to avoid brake disk to scatch the motor. Also, it cannot use motor gear within 14T or it cannot have good contact with main gear.
Vince
Friday, Sep 3 2010 (about 13 years ago)
HB Racing One Piece Aluminum Motor/Differential Mount
Has some good and bad points.
PROS: Its offset and moves the motor back a bit so the pinion doesn't extend into the battery tray area. It seems to firm up the center of the chassis.
CONS: Adjusting the motor mesh is difficult. It is nearly impossible when using anything bigger than a 21T pinion. The bottom adjusting screw is difficult to reach. Bigger motors, like the Castle 2200kv will not fit unless mods are made to the steering columns.
PROS: Its offset and moves the motor back a bit so the pinion doesn't extend into the battery tray area. It seems to firm up the center of the chassis.
CONS: Adjusting the motor mesh is difficult. It is nearly impossible when using anything bigger than a 21T pinion. The bottom adjusting screw is difficult to reach. Bigger motors, like the Castle 2200kv will not fit unless mods are made to the steering columns.