Futaba 10CG 2.4 GHz FASST "Helicopter" Radio System w/R6014HS Receiver

This is the Futaba 10CG 2.4 GHz FASST Helicopter Radio System with an R6014HS Receiver. The 10CG is perfect for the price-conscious pilot — an integrated, 2.4GHz treasure trove of features formerly found only on the most advanced Futaba systems.

But it’s also a system that boasts advantages few others can claim: 7-point throttle and pitch curves; 4 heli flight modes; a round dozen factory-defined glider mixes; graphics for programming swash plate types; swash ring; and logic switches that allow you to activate a timer or other function just by changing the positions of specific sticks or switches.
The benefits of FASST are built-in!

10CG System Overview:

• Dial ‘n Key™ programming w/joystick
• Airplane, heli and glider software
• 2048 resolution
• Real-Time Response™
• Smart Switch Technology™
• Basic & advanced menus
• 15-model memory, expandable to 48 models*
• 10-character model & user naming
• Assignable switches & dials/functions
• Model select, copy, re-set
• Data transfer
• 2 proportional slider switches
• Fail-safe, sub-trims, servo reversing & EPA
• Digital trims & trim step, expo & dual/triple rates
• 160 x 72 backlit LCD w/adjustable contrast
• Servo monitor display
• Auxiliary channel screen for 1-step function/switch assignment
• Model & system timers
• Full functionality trainer system (cord required)
• Throttle cut, hold & idle down
• Mode 1-4 selectable
• Sticks w/length and tension adjustments

* Requires optional 128K CAMPac Module (FUTM9408)

R6014HS ReceiverR6014FS Receiver

• True, 14-channel design.
• Designed specifically for FASST™ 2.4GHz systems.
• Push-button Easy-Link™ feature locks receiver to the transmitter’s unique signal.
• Includes battery fail-safe with auto cut-off and setup LED.

Heli Features

• 6 programmable mixes
• Hover/pitch
• Hover throttle
• 8 swash plate types w/graphics
• Swash AFR
• 5-point revo mixing
• Gyro menu
• 7-point throttle & pitch curves w/delay
• High/low pitch setting
• Swash ring
• Throttle hold & 3 idle-ups w/delay  

Includes:

• Futaba 10C Transmitter
  
• NT8S700B 9.6V 700mAh NiCd Transmitter Battery (FUTM1460)
• NR-4RB 1000mAh NiCd Receiver Battery (FUTM1380)
  
• FBC-19B RX/TX Wall Charger (FUTM1830)
• R6014HS Receiver (FUTL7645)
• 8" (203mm) Servo Extension
  
• Switch Harness
  
• Neck Strap (FUTM5690)

Requires:

• Servos depending on type of aircraft 
  

Transmitter Specifications:
Power Supply: 9.6V NT8S700B NiCd battery
Receiver Specifications:
Receiving Frequency: 2.4GHz
Power Requirement: 4.8-6V
Current Drain: 70mA
Size: 2.06x1.48x0.63" (52.3x37.5x16.0mm)
Weight: 0.72oz (20.8g)

This product was added to our catalog on June 18, 2009