FrSky Vantac Rover3 Tilt-Rotor FPV TriCopter Airplane RTF
FRK-3081846
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The FrSky Vantac Rover3 is a unique multirotor platform that mimics flying characteristics of not only a drone, but an airplane as well! Beginners have no fear, the Rover3 features incredible stability thanks to it's gyro stabilized flight controller. Enthusiasts can enjoy the platform as well due to the multiple modes the Rover3 offers, as well as providing a unique aesthetic for modelers to gossip over due to it's incredibly different design elements. Paired with a FrSky X-Lite S Radio Controller, users can take to the sky in as little as an hour!
Tilt-Rotor Design & Landing Gear
Featuring dual servos that steer the front rotors on the tri-copter allow for unique attitudes in flight. The mounted wheels allow for the tri-copter to taxi on the ground, allowing for smooth landings and touch-and-goes.
On-Board FPV Camera
The front mounted FPV camera allows pilots to experience flight as if they were in the cockpit*. The camera is paired with a 600mW 5.8GHz video transmitter that allows for video footage to be transmitted to the pilot. Power output, channels, and bands can be adjusted remotely via a gtrans LUA Script on FrSky radio systems.
*Note: 5.8GHz Video Receivers/Monitors/Goggles are sold separately, but are not required for flight. These are an optional add-on to enhance the flight experience.
Light Weight & Long Flight Times
When paired with a 3s 11.1V 1300mAh LiPo Battery*, flight times can range between 9-14 minutes depending on throttle usage.
*Note: Lithium battery is sold separately
Specifications:
Dimensions: 310 x 300 x 120mm
Weight: 220g
ESC: FrESC 3-in-1_20A ESC
Video Transmitter: 5.8GHz 600mW Scout VS600
Flight Controller: XSRF3O (Features built-in FrSky XSR Receiver)
Motor: 1308 2500kV Brushless
Prop: 4"
Camera: 14-17mm FPV Camera
Includes:
Tilt-Rotor Design & Landing Gear
Featuring dual servos that steer the front rotors on the tri-copter allow for unique attitudes in flight. The mounted wheels allow for the tri-copter to taxi on the ground, allowing for smooth landings and touch-and-goes.
On-Board FPV Camera
The front mounted FPV camera allows pilots to experience flight as if they were in the cockpit*. The camera is paired with a 600mW 5.8GHz video transmitter that allows for video footage to be transmitted to the pilot. Power output, channels, and bands can be adjusted remotely via a gtrans LUA Script on FrSky radio systems.
*Note: 5.8GHz Video Receivers/Monitors/Goggles are sold separately, but are not required for flight. These are an optional add-on to enhance the flight experience.
Light Weight & Long Flight Times
When paired with a 3s 11.1V 1300mAh LiPo Battery*, flight times can range between 9-14 minutes depending on throttle usage.
*Note: Lithium battery is sold separately
Specifications:
Dimensions: 310 x 300 x 120mm
Weight: 220g
ESC: FrESC 3-in-1_20A ESC
Video Transmitter: 5.8GHz 600mW Scout VS600
Flight Controller: XSRF3O (Features built-in FrSky XSR Receiver)
Motor: 1308 2500kV Brushless
Prop: 4"
Camera: 14-17mm FPV Camera
Includes:
- (1) Vantac Rover 3 TriCopter
- (1) X-Lite S Radio System
- (2) X-Lite 18650 Battery End Caps
- (1) Extra set of props
- (1) Hardware Package
- (1+) 3s 11.1V 1300mAh LiPo Battery w/JST Connector
- (1) LiPo Balance Charger
- (1) Optional: 5.8Ghz Video Receiver/Monitor/FPV Goggle System
This product was added to our catalog on March 5, 2020