The Flite Test Versa Wing is an all around performer that will meet the needs of almost any pilot. Whether it's combat, FPV, or even a delta winged trainer with gentle stall characteristics, the FT Versa Wing does it all with ease. Use a swappable power pod to fly in a tractor configuration (propeller at the front of the wing), or install the optional FT Elements Simple Firewall to operate the FT Versa Wing in a pusher configuration (propeller mounted on the back of the wing).
Power Pack Compatibility: Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft! The compatible power pack is listed below.
Simple Element Firewall is sold separately for PUSHER configurations!
Electronic Pack "C" is to ONLY be used in the swappable tractor configuration. To use these electronics in a pusher configuration, you will need a smaller prop.
Specifications: Weight: 10.6 Oz (Fully assembled; without battery)
Wingspan: 38 Inches (965mm)
Center of Gravity: 7 Inches (178mm) from the nose of wing (Recommended)
Control Surface Throws: 12 degrees
Expo Suggestions: 30%
Laser-cut Foam Airframe
Power Pod (Swappable)
Needed to Complete:
(1) Brushless Motor: 1200-1400kV minimum
(1+) Propellers: 8x6 (pusher) 9x4.7 (tractor)
(1) ESC: 20-30 Amp
(1+) Battery: 3S 11.1V LiPo 1000-2200mAh
(2) Servos: ~9 Gram Micro Servos
This product was added to our catalog on August 2, 2017
Flite Test Versa Wing Speed Build Electric Airplane Kit (965mm)
Man this thing is amazing. On a b-pack with this thing will just cruise around and do patterns battery after battery. If u want to have a reliable cruising plane to take to the field every time you go, this is the wing for you (on a b-pack motor). I can't tell what this was like to build seeing as it was given to me at this years flitefest Ohio. The only thing I would steer clear of is using a slow fly prop on this seeing as my versa was hard to keep in the air before I switched to a higher pitched prop. Great job Josh on this design and happy flying everyone.