Flite Test DR1 Triplane "Maker Foam" Electric Airplane Kit (736mm)

After 6 years of Flite Test foamys, the Red Baron flies again! Now made with Master Foam the FT DR1 Triplane was designed to build fast, fly slow and look great both on the ground and in the air. We put a lot of effort into taking a design that is known for being a handful and making easy to both build and fly. The FT DR1 Triplane is a 3 channel slow fly aircraft that can turn on a dime and be flown in a very small location. Loops, barrel rolls, wing overs and many other classic maneuvers are all possible with this little warbird. The FT DR1 Triplane is also a perfect companion for its arch rival the FT SE5, an iconic British biplane that flew the skies and shared lead with its German nemesis. Our hope is that the DR1 will be the source of many happy memories as you take to the skies and recreate epic battles with your friends in your own backyard.

We want you to have an amazing experience both in building and flying, This kit comes with everything you need to complete the FT DR1. Push-rods, control horns, firewalls and all other items needed to make this airframe electronics ready are included in the kit. If you choose to purchase our power pack F and wheels, balance, flight performance and assembly will be quick and easy.

Power Pack Compatibility:  
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft!

Maker Foam Features:

• White color is much easier to add a simple trim scheme using stickers or pinstripes 
  
• Translucent allowing models to be creatively lit from within
• Takes paint or decals extremely well 
  
• More durable than previous Flite Test foam products

Specifications:
Weight: 9.3 Oz (Fully assembled; without battery)
Wingspan: 24 Inches (736mm)
Center of Gravity: Directly on the fold of the top wing
Control Surface Throws: 12 Degrees
Expo Suggestions: 30%

Kit Includes:

• Laser-cut Foam Airframe
• Firewall
  
• Push Rods
• Control Horns
• BarBQ Skewers
  
• Velcro
  
• Throw Gauge
  
• Landing Gear Wire
  
• Specification Sheet

Needed to Complete:

• (1) Brushless Motor: Flite Test F Radial or 2204-2205 Size; 2400kV Minimum
  
• (1+) Propellers: 6x4.5
  
• (1) ESC: 20-30 Amp
• (1+) Battery: 3S 11.1V LiPo 800mAh
• (2) Servos: ~5 Gram Micro Servos
• (1) 2.4GHZ Radio System (Radio & Receiver)
• Spektrum: DX6e Radio System
  
• Futaba: 6J Radio System
• Misc. Building Supplies.

This product was added to our catalog on June 3, 2020