Fantom FR-8 Pro 1/8 Competition Sensored Brushless Combo w/ICON Motor (2150Kv)
FAN24096
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The Fantom FR-8 Pro 1/8 Competition Sensored Brushless ESC/Motor combo was developed by people who live, breath, eat and sleep R/C racing, with a goal to provide an edge over their competition. Countless hours have gone into R&D, to bring you a professional racing ESC, second to none in performance and value! The heart of the FR-8 PRO is the high-performance 32-bit CPU and proprietary firmware, providing you with buttery smooth throttle response, unmatched power delivery, and all the adjustable parameters you expect from a competition level ESC!
Fantom ICON 1/8 motors were developed for competition at the highest level, and delivers the unmatched torque, and ultra-smooth delivery, from mid to top that serious racers demand!
Features:
- ESC:
- All R&D Done in the USA
- 1:8 Scale / 3-6 Cell / 220 Amp
- Specifically designed for the highest level of spec and mod racing
- 10awg, Ultra Low Resistance Wire
- CNC Machined Aluminum Case w/ Integrated Heat Sink
- 32-bit high-performance CPU
- Ultra-Low Resistance FET Board
- 3 Integrated Max Power Capacitors
- Heavy-Duty Solder Posts
- Precision Throttle & Brake Frequency Adjustment
- 34mm Fan w/ Aluminum Fan Cover
- Ultra Precision Throttle, Brake, and Punch Control
- Firmware Updateable with Fantom LCD Program Card
- Programmable with LCD Program Card (sold separately)
- ROAR Approval Pending
- Motor:
- Designed in the USA!
- 4-Pole/8-Magnet Staggered Rotor for the Ultimate Combination of Super Smooth Power, Acceleration, Punch, and Torque.
- High-Strength and Heat Resistant Magnet Formula
- Precision Dynamic Balanced Rotor
- Advanced Hall Sensing System Utilizes a Separate Magnet Ring that Insures a Clear Signal and Protects the Hall Sensing System from Other Signal Interference
- Precision CNC Machined Aluminum Alloy Case
- High Heat Resistant Pure Copper Wire
- Sensored and Sensorless Compatibility
- Replaceable Sensor Board
- Replaceable Rotor
- 2S to 6S LiPo/LiHV Voltage Range
- High RPM Precision Bearings
- Meets ROAR Specifications
PROGRAMMABLE PARAMETERS:
- GENERAL:
- RUNNING MODE – Forward/Brake, Forward/Brake/Reverse, Forward/Reverse
- LOW VOLTAGE CUTOFF – Disable, Auto, custom 3.0v to 11.1v (0.1v increments)
- ESC OVER-HEAT PROTECTION – Disable, 3 steps
- MOTOR ROTATION – Normal, Reverse
- DEADBAND – 12 steps
- BEC OUTPUT – 6v, 7.4v
- THROTTLE:
- INITIAL POWER LIMITER – 30 steps
- THROTTLE RATE – 30 steps
- DRIVE FREQUENCY – 1K, 2K, 4K, 8K, 16K
- RPM LOCK – 1% to 100% (1% increments)
- THROTTLE CURVE – Linear, Custom
- BRAKE:
- INITIAL BRAKE – 1% to 20% (1% increments)
- DRAG BRAKE – 0% to 100% (1% increments)
- BRAKE FORCE – 0% to 100% (12.5% increments)
- INITIAL BRAKE RESPONSE – 20 steps
- BRAKE RATE – 20 steps
- BRAKE FREQUENCY – 1K, 2K, 4K, 8K, 16K
- BRAKE CURVE – Linear, Custom
- BOOST:
- BOOST TIMING – 0° to 64° (1° increment)
- BOOST TRIGGER LEVEL – 50 steps
- BOOST TRIGGER RATE – 10 steps
- TURBO:
- TURBO TIMING – 0° to 64° (1° increment)
- START RPM – 8,000 RPM to 50,000 RPM (1000 RPM increments)
- TURBO DELAY – Instant, 0.05 seconds to 1 second (.05 second increments)
- ACTIVATION METHOD – Full Throttle, RPM, Full Throttle + RPM
- TURBO ON RATE – 10 steps
- TURBO OFF RATE – Instant, 10 steps
- DATA:
- MINIMUM BATTERY VOLTAGE
- MAX ESC TEMP
- MAX MOTOR RPM
Specifications:
- ESC:
- Continuous Current: 220 Amps
- Battery Input: 3-6 cell LiPo
- BEC Output: Linear 6V or 7.4V Adjustable / 8 Amps
- Dimensions without fan: (L) 55mm x (W) 40mm x (H) 34mm
- Weight without wiring and fan: 160 grams
- Sensored: Yes
- Sensorless: Compatible but not optimal
- Motor Limit: 4S LiPo/ 12cell NiMH: 3000KV for 4274 size, 6S LiPo/ 18cell NiMH: 2400KV for 4274 size
- Recommended Applications: 1/8 Scale Off Road/On Road
- Motor:
- Cells: 2-6S LiPo
- Diameter: 40.0/42.0mm
- Length: 70.5mm
- Shaft Diameter: 5.0mm
- Weight: 350g
Includes:
- FR-8 PRO ESC
- ICON 2150Kv Motor
- 34mm Fan
- Machined Aluminum Fan Cover
- (2) 165mm Input Wires – 10awg, Ultra-Low Resistance Wire (pre-soldered on ESC)
- (3) 165mm Output Wires – 10awg, Ultra-Low Resistance Wire (pre-soldered on ESC)
- (3) Integrated Max Power Capacitors
- Shrink Tube w/ Fantom logo
This product was added to our catalog on January 31, 2020
Keith Smith
Verified Owner
Thursday, Oct 29 2020 (about 3 years ago)
Fantom FR-8 Pro 1/8 Competition Sensored Brushless Combo w/ICON Motor (2150Kv)
the fantom fr-8 competition is a good speed control and motor, has good power and torque. after geting the programmer card and just the setting it maybe be the fastest r/c. this is one great motor and speed control.