Fantom FR-10 Pro ESC Program Box w/PC interface
FAN24053
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Fantom FR-10 Pro ESC Program Box.
Features:
- Designed specifically for the Fantom FR-10 PRO electronic speed control.
- Use as a stand-alone device to set the parameters of the FR-10 PRO ESC.
- Use with a PC to update the firmware of the FR-10 PRO ESC and/or to set the parameters of the FR-10 PRO ESC on a PC.
- Includes all required cables.
Programmable Parameters:
- GENERAL
- RUNNNING MODE - Forward/Brake, Forward/Brake/Reverse, Forward/Reverse
- LOW VOLTAGE CUTOFF - Disable, Auto, custom 3.0v to 11.1v (0.1v increments)
- ESC OVER-HEAT PROTECTION - Disable, 3 steps
- MOTOR ROTATION - Normal, Reverse
- RACE MODE - Stock (Blinky), Modified
- DEADBAND - 12 steps
- BEC OUTPUT - 6v, 7.4v
- THROTTLE
- INITIAL POWER LIMITER - 30 steps
- THROTTLE RATE - 30 steps
- DRIVE FREQUENCY - 1K, 2K, 4K, 8K, 16K
- RPM LOCK - 1% to 100% (1% increments)
- THROTTLE CURVE - Linear, Custom
- BRAKE
- INITIAL BRAKE - 1% to 20% (1% increments)
- DRAG BRAKE - 0% to 100% (1% increments)
- BRAKE FORCE - 0% to 100% (12.5% increments)
- INITIAL BRAKE RESPONSE - 20 steps
- BRAKE RATE - 20 steps
- BRAKE FREQUENCY - 1K, 2K, 4K, 8K, 16K
- BRAKE CURVE - Linear, Custom
- OFF BY RADIO - Yes, No
- BOOST
- BOOST TIMING - 0° to 64° (1° increments)
- BOOST TRIGGER LEVEL - 50 steps
- BOOST TRIGGER RATE - 10 steps
- TURBO
- TURBO TIMING - 0° to 64° (1° increments)
- START RPM - 8,000 RPM to 50,000 RPM (1000 RPM increments)
- TURBO DELAY - Instant, 0.05 seconds to 1 second (.05 second increments)
- ACTIVATION METHOD - Full Throttle, RPM, Full Throttle + RPM
- TURBO ON RATE - 10 steps
- TURBO OFF RATE - Instant, 10 steps
- DATA
- MINIMUM BATTERY VOLTAGE
- MAX ESC TEMP
- MAX MOTOR RPM
Specifications:
Dimensions: 91mm x 54mm x 18mm (L/W/H)
Weight: 68g
Power Supply: DC 5.0V~12.0V
This product was added to our catalog on November 20, 2018