E-flite Mini Ultra Stick ARF

Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

The Mini Ultra Stick can be assembled and ready for flight in just 1 to 2 hours thanks, to:
Preinstalled control surfaces and hinges
Preinstalled control horns
Preinstalled pushrods
Bolt-on horizontal and vertical stabilizers
Preassembled landing gear with wheels attached

Features

• Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
• 95% factory-built; get flying in 2 hours or less
• Lightweight balsa and plywood construction
• Two firewall options to use a variety of motor sizes, types & brands
• Includes molded firewall stick mount
• Control surfaces have factory-installed hinges and control horns
• Bolt-on tail requires no gluing and secures with two lock nuts
• Optional quad-flap configuration
• Tough, lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes
• Covered in genuine Hangar 9 UltraCote
• Great match for E-flite Park 450 Outrunner Brushless Motor
• Easy access top battery hatch
• Design based on Hangar 9’s popular line of Ultra Sticks

Specifications:
Wing Span: 38.75 in (985mm)
Overall Length: 34 in (865mm)
Wing Area: 325 sq in (21 sq dm)
Flying Weight: 22 - 25 oz (625 - 710g)
Motor Size: Park 400 Inrunner or Park 450 Outrunner
Radio: 4-channel or greater (7-channel for quad flaps)
Servos: 4 sub-micros (6 sub-micros for quad flaps)
Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White
CG (center of gravity): 2.25 in (57mm) behind the leading edge
Prop Size: 10x7 - 11x7
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po
Flaps: Yes (optional)
Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
Approx. Flying Duration: 10-20 minutes
Scale: Park Flyer
Approx. Assembly Time: 1-2 hours
Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner

This product was added to our catalog on January 25, 2008