E-flite Habu 32x DF ARF Electric Ducted Fan Airplane (1070mm)
EFL8085
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons
This is the E-flite Habu 32x DF ARF. The E-flite Habu 32x DF jet takes electric ducted fan (EDF) performance and engineering to new heights. Designed around the E-flite Delta-V 32 80mm fan unit and high-speed DF32 brushless motor, its hyper-efficient intake and exhaust ducting deliver a potent power system that produces a large amount of thrust available as quickly as you can move the throttle stick. The redesigned swept-back wing and horizontal stabilizers enhance the sleek appearance. The result is a sport EDF that will give even experienced jet jockeys goose bumps. The Habu 32x DF boasts a level of fit and finish that is every bit as impressive as its performance. Even more satisfying is the short amount of time you’ll need to get this hot-rod flight-ready, combined with flight performance that the discerning modeler and expert pilot can appreciate.
Rigid Construction
The swept-back planform of the wings and horizontal stabilizers feature full-balsa sheeting and genuine UltraCote® film covering. The wings attach to the fuselage using carbon fiber blade spars that fit into aluminum sockets for a rigid structure that can handle incredible speeds and G-loads.
Retract Ready
The Habu 32x DF features built-in wheel wells and hard-points that easily accept the required retracts such as the E-flite 15-25 size electric retracts (sold separately). The gear doors included improve streamlining and conceal the main landing gear struts when they’re retracted.
Fast Assembly
The ailerons, elevator and flaps use a sealed-hinge of genuine Hangar 9® UltraCote® covering for a clean look and less drag. The complex, bifurcated fiberglass intake ducts are factory installed and perfectly faired inside the fuselage so you can get in the air quicker.
Optimized Ducting
An optimized intake and exhaust design delivers maximum fan thrust without requiring cheater holes. As a result, the Habu 32x DF delivers outstanding performance in all flight conditions, reduced amp draw, quieter operation and a better flying experience overall.
Easy Access that’s Sleek
The quick-release hatch makes swapping out batteries and accessing electronics easy. Nose and belly hatches make access to the nose gear and EDF simple. A tinted clear canopy adds greatly to its "real" appearance in flight. Pilot figure not included.
Specifications:
Wingspan: 42.0 in (1070mm)
Overall Length: 49.5 in (1250mm)
Wing Area: 412 sq. in. (26.6 sq. dm.)
Flying Weight: 7.05 - 7.50 lb (3.20 - 3.40 kg)
Motor Size: DF 32 Brushless Motor, 2150Kv
Radio: 6+ Channel Radio System (required)
Servos: Micro Servos (8 required)
Trim Scheme Colors: UltraCote - Dark Yellow, Silver, Pearl Charcoal
CG (center of gravity): 4.30-4.90 in (110-125mm) back from the leading edge at wing root
Speed Control : 80-Amp brushless
Recommended Battery: 22.2V 6S 5000mAh 30C LiPo, 10AWG, EC5
Flaps: Yes
Retracts: Required (not included)
Experience Level: Advanced
Recommended Environment: Outdoor
Assembly Time: 7-9 Hours
Rigid Construction
The swept-back planform of the wings and horizontal stabilizers feature full-balsa sheeting and genuine UltraCote® film covering. The wings attach to the fuselage using carbon fiber blade spars that fit into aluminum sockets for a rigid structure that can handle incredible speeds and G-loads.
Retract Ready
The Habu 32x DF features built-in wheel wells and hard-points that easily accept the required retracts such as the E-flite 15-25 size electric retracts (sold separately). The gear doors included improve streamlining and conceal the main landing gear struts when they’re retracted.
Fast Assembly
The ailerons, elevator and flaps use a sealed-hinge of genuine Hangar 9® UltraCote® covering for a clean look and less drag. The complex, bifurcated fiberglass intake ducts are factory installed and perfectly faired inside the fuselage so you can get in the air quicker.
Optimized Ducting
An optimized intake and exhaust design delivers maximum fan thrust without requiring cheater holes. As a result, the Habu 32x DF delivers outstanding performance in all flight conditions, reduced amp draw, quieter operation and a better flying experience overall.
Easy Access that’s Sleek
The quick-release hatch makes swapping out batteries and accessing electronics easy. Nose and belly hatches make access to the nose gear and EDF simple. A tinted clear canopy adds greatly to its "real" appearance in flight. Pilot figure not included.
Features:
- Streamlined swept-back planform design
- Vibrant trim scheme in high-gloss paint and genuine Hangar 9® UltraCote® covering
- Molded fiberglass fuselage and vertical stabilizer
- Full balsa-sheeting wing and horizontal stabilizers
- Two-piece, plug-in wings and stabilizers with carbon blade spar support
- Pre-hinged elevators, ailerons and functional flaps
- Hyper-efficient inlet and exhaust duct design
- Ready for the E-flite® Delta-V® 32 EDF power system (sold separately)
- E-flite 15-25 size electric retract ready (required-sold separately)
- Optimized for use with modern Spektrum™ micro servo technology
- Includes main wheel landing gear doors that improve streamlining
- Quick-release battery hatch features a tinted canopy and cockpit detail
- Complete precision hardware package includes machined aluminum wheels
Specifications:
Wingspan: 42.0 in (1070mm)
Overall Length: 49.5 in (1250mm)
Wing Area: 412 sq. in. (26.6 sq. dm.)
Flying Weight: 7.05 - 7.50 lb (3.20 - 3.40 kg)
Motor Size: DF 32 Brushless Motor, 2150Kv
Radio: 6+ Channel Radio System (required)
Servos: Micro Servos (8 required)
Trim Scheme Colors: UltraCote - Dark Yellow, Silver, Pearl Charcoal
CG (center of gravity): 4.30-4.90 in (110-125mm) back from the leading edge at wing root
Speed Control : 80-Amp brushless
Recommended Battery: 22.2V 6S 5000mAh 30C LiPo, 10AWG, EC5
Flaps: Yes
Retracts: Required (not included)
Experience Level: Advanced
Recommended Environment: Outdoor
Assembly Time: 7-9 Hours
Needed To Complete:
- 6+channel full-range transmitter and receiver
- 80mm EDF system with rotor
- 32-class brushless EDF motor
- 80-amp, 22.2V brushless ESC
- 6S 5000mAh 22.2V high-power Li-Po battery
- (8) metal-gear micro servos
- Tricycle 15–25 size retractable landing gear
- High-power AC/DC Li-Po balance charger
This product was added to our catalog on November 12, 2014