The E-flite AT-6 1.5m Bind-N-Fly Basic Electric Airplane gives you out of the box enjoyment with an Texan airframe beautifully finished in durable EPO foam. The structure of the lightweight components features composite reinforcement throughout to provide an outstanding blend of strength and flight performance. The one-piece wing harnesses the ailerons, sturdy electric retracts and the distinctive three-panel split-flaps without a web of wires. Instead, all servo leads are concealed into a hands-free connection system that makes aircraft assembly ultra-simple.
Behind the radial engine and exhaust detail is a powerful brushless motor system that only requires a 3S LiPo battery. Plus, there’s ample room for a high-capacity pack under the pilot appointed magnetic canopy hatch so you can enjoy longer flight times. In the air, light wing loading and an abundant amount of thrust combine to deliver a warbird experience that’s as easy to handle as it is fun to fly. Whether it’s your first scale model or a special addition to your collection, this AT-6 is sure to be the easy-flying heavy-metal replica you’ve always wanted.
Bind-N-Fly® Convenience: As an E-flite Bind-N-Fly® Basic RC replica, you can enjoy air superiority in no time at all. Final assembly is minimal and can be complete in about the time it takes to charge your battery. Model Presets are also available to make Spektrum DSM2/DSMX transmitter programing even simpler, which means that getting into the air quickly has never been easier. (Transmitter, Flight Battery, and Charger Sold Separately)
An Inspirational Trim Scheme: The trim scheme is inspired by a variant better known as an LT-6 flown by the "Mosquitos" squadron who performed dangerous surveillance to coordinate key missions throughout the Korean War.
Functional Detail: The operational flap system replicates the distinctive full-scale, split-flap arrangement. The landing gear features scale wheels, strut covers, hinged doors and electric-retract action.
Hands-Free Servo Connection: You don't have to touch any servo leads. An innovative hands-free servo connection system automatically plugs in the aileron, flap and retract connectors whenever you attach the wing.
Easy Access and Assembly: Out of the box, basic assembly requires only two screws. At the field, the one-piece wing features a hands-free servo connection system and the security of four mounting screws. Easy access to your flight battery is through the large magnetic top hatch.
Abundant Power with Just a 3S Pack: The power system features a strong 15-size brushless outrunner, 40-amp ESC and a scale 2-blade propeller that combine with your 2200–3200mAh 3S 30C Li-Po battery to deliver outstanding thrust.
Durable Construction: Construction with durable EPO material makes it possible to replicate complex detail in a lightweight form. The result is an outstanding scale appearance that’s easy to maintain and allows the most satisfying flight experience possible to shine through.
(1) Spektrum AR636A Receiver with AS3X and SAFE Technologies
(1) User Manual
Needed to Complete:
Full-range, 6+ Channel DSMX®/DSM2® Transmitter
2200-3200mAh 3S LiPo Flight Battery
3S Compatible LiPo Charger
This product was added to our catalog on December 18, 2017
Wednesday, Aug 1 2018 (7 weeks ago)
E-flite AT-6 BNF Basic Electric Airplane (1500mm)
Like this airplane a lot. Very stable flier. I haven't been using flaps much on my airplanes, so I am using this as a flap trainer. Only issues I had during assembly was the screw hole, for the screw that holds the left horizontal stabilizer in place, seems to be way too big. The screw has nothing to bite into. Just used foam save glued the stabilizer into place. There are two plastic tabs at the back edge of the canopy, (I believe these are so you can lift up the canopy easier). Both were not glued in with much glue at all, I had to re-glue them in place.