E-flite 5-Amp Pro Brushless ESC
EFLA1005
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons
The E-flite® 5-Amp Pro Brushless ESC has been designed for use in radio control aircraft and to support continuous currents of up to 5 amps when using 2 Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.
Key Features:
- Up to 5-amp continuous current with proper air flow
- Drives up to 4 sub-micro servos on 2S
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low-voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Soft start
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Specifications:
- Brake: Yes - Programmable
- Continuous Maximum Current: 5A
- Momentary Peak Current: 6A (15 sec)
- Dimensions (WxLxH): 17mm (.67 in) x 25mm (1 in) x 7mm (.27 in)
- Weight: 8 g (.28 oz)
- Wire Gauge: 22AWG with JST connector on battery input leads or 22AWG with 2mm female gold bullet connectors on motor output leads
- Cells w/BEC: 2–3S Li-Po or 6–7 cell Ni-MH/Ni-Cd
This product was added to our catalog on June 17, 2016