Eagle Tree Systems eLogger V4 w/Integrated Connectors
This is the Eagle Tree Systems eLogger V4 with Integrated Connectors. Whether youíre into Electric Model Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.
The eLogger system comes with everything you need to log, analyze, and graph; mAH, Current, Wattage, Voltage and throttle position. And, your eLogger is tremendously expandable, by adding additional Eagle Tree sensors.
Why should I choose the Eagle Tree eLogger?
Some ESC manufacturers are adding data logging to their products. However, these logging capabilities are limited, have very short logging times at high sample rates, and few if any additional sensors are available. While these built-in solutions may "whet your appetite" for data, the eLogger and its incredible array of sensors and powerful software will let you measure virtually anything you will ever need. Also, investing in logging add-ons that are tied to a particular ESC means that the investment is only good as long as you use that ESC. Eagle Tree telemetry is portable across any ESC brand/model. Finally, while the ESC manufacturers and others may lose interest in their logging capabilities if they don't sell well, you can rest assured that Eagle Tree will continue to enhance and expand the eLogger with additional features and sensors.
Here are a few of the enhancements with the eLogger V4:
Voltage Measurement: approx 5V to 80V
Voltage Resolution: approx 0.02V
Current Measurement: up to 100 Amps peak, (150 Amps peak with the MPRV4-LEADS-150)
Current Resolution: approx 0.02 Amps (0.035 Amps with the MPRV4-LEADS-150)
Current Draw: approx 30 mA with no sensors
Weight: Unit with Integrated Connectors: approx 22 grams
Temperature: Dual inputs, 0 degrees F to 424 degrees F (three temperature inputs)
RPM range: approx 100 RPM to 50,000+ RPM
Units of Measure supported: English and Metric
Software Language Support: English, German, Chinese
Measurements: approx 2.25" x 1" x 0.5" (57mm x 28mm x 13mm) including sensor pins
Record Time: Varies with sample rate, parameters being recorded, and "activeness" of the model. Anywhere from around 45 minutes to many hours is attainable depending on these settings.
This product was added to our catalog on August 26, 2014