This is an Eagle Tree Systems 3-Axis "7+ Gs" G-Force MicroSensor. Need to know how many G's you pulled in that last barrel roll? Eagle Tree is pleased to offer the world's first standalone G-Force meter for RC models. The low G sensor measures up to 8g (at least 7g) in the X, Y and Z axes.
This tiny MicroSensor has two modes. It will work standalone with no additional equipment required, as well as with your eLogger, OSD and OSD Pro products, or PowerPanel LCD for full data logging and display.
For standalone mode, simply plug the sensors into a spare receiver channel or small battery (4V to 16V) and fly your model. Then, when you land, your maximum acceleration (G's) will display on the built-in 7 segment LED. For example, if you pulled 6 G, the unit will display “6” repeatedly. No configuration, additional equipment, or computer is required! Or, connect your MicroSensor to Eagle Tree eLogger for full logging and graphing of your flight’s G's!
Acceleration recording limits:
to at least +/- 7 g (up to 8 g) in the X, Y and Z axes
approx. 0.05 G in each axis
Power input (Standalone Mode):
4V to 16V
approximately 4 grams (0.15 oz)
approximately 28x16x10mm (1.1” x 0.62” x 0.4”)
Compatible with eLogger but not Data Recorder.
This product was added to our catalog on September 19, 2014